OSHA Inspection: ICP BUILDING SOLUTIONS LLC

Issued

Dec 22, 2022

Abate by

Jan 20, 2023

Penalty

Initial $10,360 · Current $10,360

General-duty citation text

29 CFR  1910.138(a):The employer did not select and require employee(s) to use appropriate hand protection when employees' hands were exposed to hazards such as those from skin absorption of harmful substances; severe cuts or lacerations; severe abrasion; punctures; chemical burns; thermal burns; and harmful temperature extremes.  On or about July 21, 2022, the employer failed to ensure that employees had adequate hand protection when working with hazardous chemicals. Employees used acetone to remove chemical/adhesive residue from the skin.

Issued

Dec 22, 2022

Penalty

Initial $12,431 · Current $12,431

General-duty citation text

29 CFR  1910.147(c)(4)(i):Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  On or about July 21, 2022, the employer failed to ensure that energy control procedures were utilized when unjamming product on the Line #1 Labeler.

Issued

Dec 22, 2022

Abate by

Feb 10, 2023

Penalty

Initial $12,431 · Current $12,431

General-duty citation text

29 CFR  1910.147(c)(6)(i):The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:  On or about July 21, 2022, the employer failed to ensure that periodic (annual) audits of the machine specific lockout procedures were conducted.

Issued

Dec 22, 2022

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.147(d):The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6):  On or about July 21, 2022, the employer did not provide service and maintenance employees with an adequate machine specific Lockout procedure that correctly identifies the steps and sequences to lockout the equipment on the Line #1 Labeler and supporting equipment.

Issued

Dec 22, 2022

Penalty

Initial $12,431 · Current $12,431

General-duty citation text

29 CFR  1910.147(c)(7)(i)(A):Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation:  On or about July 21, 2022, the employer failed to conduct adequate training for authorized employees, as defined by the standard.

Issued

Dec 22, 2022

Abate by

Feb 10, 2023

Penalty

Initial $12,431 · Current $12,431

General-duty citation text

29 CFR  1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  On or about July 21, 2022, and on or about  August 3, 2022, and again on or about November 15, 2022,  employees were exposed to ingoing nip points on the unguarded portion of the Line #1 accumulation table.