HOLLIS CENTER, ME —
OSHA Inspection: BEAR HILL LUMBER CO
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of BEAR HILL LUMBER CO in 668 HOLLIS ROAD, HOLLIS CENTER, ME 04042 (NAICS 321912). OSHA activity number 346163983.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BEAR HILL LUMBER CO
- Site address
- 668 HOLLIS ROAD
- City
- HOLLIS CENTER
- State
- ME
- ZIP
- 04042
- Mailing
- 668 HOLLIS ROAD, HOLLIS CENTER, ME 04042
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321912
- Employees
- 7
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C02 II
- Issued
- Nov 9, 2022
- Abate by
- Dec 29, 2022
- Penalty
- Initial $2,642 · Current $1,321 Reduced
General-duty citation text
29 CFR 1910.147(c)(2)(ii):The employer's tagout energy control program procedures did not successfully comply with 29 CFR 1910.147(c)(3) and no lockout was provided for employee protection. Establishment - The employer did not ensure that the debarking machine was locked out prior to cleaning between the rollers.
Recent events (2)
- — I (S) $1321
- — Z (S) $2642
1910.147 C06 I
- Issued
- Nov 9, 2022
- Abate by
- Dec 29, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i):The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed. Establishment - The employer did not conduct annual inspections of the lockout/tagout energy control procedures.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C05 II
- Issued
- Nov 9, 2022
- Abate by
- Feb 13, 2023
- Penalty
- Initial $2,642 · Current $1,321 Reduced
General-duty citation text
29 CFR 1910.147(c)(5)(ii):Lockout devices and tagout devices were not singularly identified. Establishment - The employer did not ensure employees used locks unique to lockout/tagout (LOTO) applications or to an individual employee.
Recent events (2)
- — I (S) $1321
- — Z (S) $2642
1910.147 D04 II
- Issued
- Nov 9, 2022
- Abate by
- Feb 13, 2023
- Penalty
- Initial $2,642 · Current $1,321 Reduced
General-duty citation text
29 CFR 1910.147(d)(4)(ii): Lockout devices utilized were not affixed in a manner that held the energy isolating device in a "safe" or "off" position. Establishment - Lockout devices did not have the key removed from the locks during lockout/tagout of the head saw or log debarker thus not ensuring that the energy was completely isolated.
Recent events (2)
- — I (S) $1321
- — Z (S) $2642
1904.39 A02
- Issued
- Nov 9, 2022
- Penalty
- Initial $2,642 · Current $0 Reduced
General-duty citation text
29 CFR 1904.39(a)(2):The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye. Establishment- The employer did not report an employee amputation, to OSHA, within 24 hours. An amputation occurred at the facility on August 4, 2022 and was not reported to OSHA until August 14, 2022.
Recent events (2)
- — I (O) $0
- — Z (O) $2642
1910.147 C07 IV
- Issued
- Nov 9, 2022
- Abate by
- Feb 13, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(iv):The employer's certification of employee lockout/tagout training did not contain each employee's name and date of training. Establishment - The employer did not ensure that the certification of lockout/tagout training on 2/14/2022 included employee names.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Bear Hill Lumber CO
View Bear Hill Lumber CO's full OSHA safety record →
More inspections in this industry (NAICS 321912)
More inspections in ME
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346163983.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.