MORROW, OH —
OSHA Inspection: VALLEY MACHINE TOOL INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of VALLEY MACHINE TOOL INC. in 9773 MORROW-COZADDALE ROAD, MORROW, OH 45152 (NAICS 332710). OSHA activity number 346164981.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VALLEY MACHINE TOOL INC.
- Site address
- 9773 MORROW-COZADDALE ROAD
- City
- MORROW
- State
- OH
- ZIP
- 45152
- Mailing
- 9773 MORROW-COZADDALE ROAD, MORROW, OH 45152
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 19
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.305 G01 IV A
- Issued
- Sep 8, 2022
- Abate by
- Oct 4, 2022
- Penalty
- Initial $2,113 · Current $1,479 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv) Unless specifically permitted otherwise in paragraph (g)(1)(ii) of this section, flexible cords and cables may not be used: (A): As a substitute for the fixed wiring of a structure. a) On or about August 22, 2022, an extension cord was used to connect the Newall DP700 readout kit used on the SHARP 2240 lathe.
Recent events (2)
- — I (S) $1479.1
- — Z (S) $2113
1910.37 B06
- Issued
- Sep 8, 2022
- Abate by
- Oct 4, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(6): Each exit sign must be illuminated to a surface value of at least five foot-candles (54 lux) by a reliable light source and be distinctive in color. Self-luminous or electroluminescent signs that have a minimum luminance surface value of at least .06 footlamberts (0.21 cd/m2) are permitted. a) On or about August 22, 2022, the exit sign in the employee break room was not illuminated.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.132 D02
- Issued
- Sep 8, 2022
- Abate by
- Oct 4, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2):The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment. a) On or about August 22, 2022, the employer did not certify in writing that they had completed a workplace hazard assessment to determine what personal protective equipment would protect employees from hazards identified in the workplace.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 F06
- Issued
- Sep 8, 2022
- Abate by
- Oct 4, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(6): Workplace labeling. Except as provided in paragraphs (f)(7) and (f)(8) of this section, the employer shall ensure that each container of hazardous chemicals in the workplace is labeled, tagged or marked with either: (i) The information specified under paragraphs (f)(1)(i) through (v) of this section for labels on shipped containers; or, (ii) Product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals, and which, in conjunction with the other information immediately available to employees under the hazard communication program, will provide employees with the specific information regarding the physical and health hazards of the hazardous chemical. a) On or about August 22, 2022 behind mills RH33 and Fadal 1, Way Lubricant (Skin and eye irritant) was placed in secondary containers and labeled as 'way lube', but was not labeled with general information regarding the hazards of the chemical.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Valley Machine Tool INC.
View Valley Machine Tool INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346164981.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.