LAKE ZURICH, IL —
OSHA Inspection: MORGAN BRONZE PRODUCTS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MORGAN BRONZE PRODUCTS, INC. in 340 EAST IL ROUTE 22, LAKE ZURICH, IL 60047 (NAICS 332710). OSHA activity number 346174345.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MORGAN BRONZE PRODUCTS, INC.
- Site address
- 340 EAST IL ROUTE 22
- City
- LAKE ZURICH
- State
- IL
- ZIP
- 60047
- Mailing
- 340E, ILLINOIS 22, LAKE ZURICH, IL 60047
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 48
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.212 A01
- Issued
- Jan 26, 2023
- Abate by
- Feb 22, 2023
- Penalty
- Initial $10,938 · Current $7,657 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Production Area - On August 25, 2022, the employer did not ensure that employees were adequately protected from point of operation hazards and rotating parts on equipment, such as the CNC machines, including the Okuma CNC Machine, model #LC30-2SC, serial #1888, Okuma CNC Machine, model #LC30-2SC, serial #1478, Okuma CNC Machine, model #LU35, and Okuma CNC Machine, model #LU300M. The machines were not equipped with a safety interlock switch on the front panel door to stop the machine when an operator opens the door. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
- — I (S) $7656.6
- — Z (S) $10938
1910.242 B
- Issued
- Jan 26, 2023
- Abate by
- Feb 22, 2023
- Penalty
- Initial $4,687 · Current $3,281 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: a) Production Area - On August 25, 2022, the employer did not ensure the compressed air used for cleaning on the Haas CNC Machine #49, was reduced to less than 30 p.s.i. The measured air pressure was at 60 p.s.i. b) Production Area - On August 25, 2022, the employer did not ensure the compressed air used for cleaning on the Doosan Puma 300, CNC Machine, was reduced to less than 30 p.s.i. The measured air pressure was at 90 p.s.i. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $3280.9
- — Z (S) $4687
1910.303 B02
- Issued
- Jan 26, 2023
- Abate by
- Feb 22, 2023
- Penalty
- Initial $4,687 · Current $3,281 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled equipment were not used or installed in accordance with any instructions included in the listing or labeling: a) Production Area - On August 25, 2022, the employer did not ensure that the metal duplex receptacle box was installed in accordance with the instructions included in its listing or labeling. The receptacle box was installed from a flexible cord on top of a Okuma CNC Machine, model #LC30-2SC, serial #1478, powering a code numbering unit. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $3280.9
- — Z (S) $4687
More inspections at Morgan Bronze Products, INC.
View Morgan Bronze Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346174345.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.