Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: TEXAS CUT STOCK, LLC

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of TEXAS CUT STOCK, LLC in 469 FM 3417, MOUNT PLEASANT, TX 75455 (NAICS 321113). OSHA activity number 346181068.

Watch Texas CUT Stock, LLC — free Get an email when a new federal OSHA severe-injury report for Texas CUT Stock, LLC is published. One employer, no account, unsubscribe in one click.
Site address
469 FM 3417
City
MOUNT PLEASANT
State
TX
ZIP
75455
Mailing
469 FM 3417, MOUNT PLEASANT, TX 75455
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321113
Employees
29
Ownership type
A

2 citations on file for this inspection.

1910.95 C01

Serious Gravity 5 9 instances 24 exposed
Issued
Abate by
Penalty
Initial $7252.00 · Current $7252.00

Hazardous substances 8111

29 CFR  1910.95(c)(1): The employer did not administer a continuing, effective hearing conservation program as described in 29 CFR 1910.95(c) through (o) whenever employee noise exposures equaled or exceeded an 8-hour time-weighted average sound level of 85 decibels measured on the A scale, or equivalently a dose of fifty percent:  (a) In the sawmill, an edger operator was exposed to noise levels at 167.9% of the permissible 8-hour TWA (90 dBA).  The equivalent dBA level of 167.9% is approximately 93.7 dBA. Sampling was performed for 423 minutes during one shift.  Zero exposure was assumed for the unsampled time.  (b) In the sawmill, an edger operator assistant was exposed to noise levels at 109.7% of the permissible 8-hour TWA (90 dBA).  The equivalent dBA level of 109.7% is approximately 90.6 dBA.  Sampling was performed for 318 minutes during one shift.  Zero exposure was assumed for the unsampled time.  (c) In the sawmill, a chop saw operator was exposed to noise levels at 94.80% of the permissible 8-hour TWA (90 dBA).  The equivalent dBA level of 94.80% is approximately 89.6 dBA.  Sampling was performed for 411 minutes during one shift.  Zero exposure was assumed for the unsampled time.  (d) In the sawmill, a chop saw catcher was exposed to noise levels at 102.7% of the permissible 8-hour TWA (90 dBA).  The equivalent dBA level of 102.7% is approximately 90.1 dBA.  Sampling was performed for 408 minutes during one shift.  Zero exposure was assumed for the unsampled time.  (e) In the sawmill, a band saw line operator was exposed to noise levels at 93.44% of the permissible 8-hour TWA (90 dBA).  The equivalent dBA level of 93.44% is approximately 89.5 dBA.  Sampling was performed for 393 minutes during one shift.  Zero exposure was assumed for the unsampled time.  (f) In the sawmill, a band saw line operator was exposed to noise levels at 68.58% of the permissible 8-hour TWA (90 dBA).  The equivalent dBA level of 68.58% is approximately 87.2 dBA.  Sampling was performed for 272 minutes during one shift.  Zero exposure was assumed for the unsampled time.  (g) In the sawmill, a stacker was exposed to noise levels at 91.38% of the permissible 8-hour TWA (90 dBA).  The equivalent dBA level of 91.38% is approximately 89.3 dBA.  Sampling was performed for 401 minutes during one shift.  Zero exposure was assumed for the unsampled time.  (h) In the sawmill, a stacker was exposed to noise levels at 99.47% of the permissible 8-hour TWA (90 dBA).  The equivalent dBA level of 99.47% is approximately 89.9 dBA.  Sampling was performed for 400 minutes during one shift.  Zero exposure was assumed for the unsampled time.  (i)  In the sawmill, a chop saw operator was exposed to noise levels at 84.28% of the permissible 8-hour TWA (90 dBA).  The equivalent dBA level of 84.28% is approximately 88.7 dBA.  Sampling was performed for 418 minutes during one shift.  Zero exposure was assumed for the unsampled time.
Recent events (1)
  • — Z (S) $7252

1910.141 C01 I

Other-than-serious 1 instance 29 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.141(c)(1)(i): Toilet facilities were not provided in accordance with TABLE J-1 of this Section:  (a) Sawmill employees were not provided with an adequate number of toilet facilities.
Recent events (1)
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346181068.