TALLADEGA, AL —
OSHA Inspection: TALLADEGA FOUNDRY & MACHINE COMPANY, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of TALLADEGA FOUNDRY & MACHINE COMPANY, INC. in 726 STONE AVENUE, TALLADEGA, AL 35160 (NAICS 331511). OSHA activity number 346206675.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TALLADEGA FOUNDRY & MACHINE COMPANY, INC.
- Site address
- 726 STONE AVENUE
- City
- TALLADEGA
- State
- AL
- ZIP
- 35160
- Mailing
- P.O. BOX 579, TALLADEGA, AL 35161
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331511
- Employees
- 55
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.141 A03 I
- Issued
- Jan 30, 2023
- Abate by
- Mar 6, 2023
- Penalty
- Initial $3,984 · Current $1,992 Reduced
General-duty citation text
1910.141(a)(3)(i): Places of employment were not kept clean to the extent that the nature of the work allowed: (a) On or about 09/08/2022 - Wheelabrator Area, employees were exposed to slip and fall hazards when steel shot was allowed to accumulate on the floor while parts were blasted.
Recent events (2)
- — I (O) $1992
- — Z (S) $3984
1910.29 B14
- Issued
- Jan 30, 2023
- Abate by
- Mar 6, 2023
- Penalty
- Initial $4,931 · Current $2,959 Reduced
General-duty citation text
1910.29(b)(14): Guardrail systems were not installed on ramps and runways along each unprotected side or edge: (a) On or about 09/08/2022 - Mill room, employees were exposed to a fall hazard of approximately 5 feet at highest level when guardrails were not provided along a fixed ramp that connected the access between the first two levels.
Recent events (2)
- — I (S) $2958.6
- — Z (S) $4931
1910.178 Q01
- Issued
- Jan 30, 2023
- Abate by
- Mar 6, 2023
- Penalty
- Initial $5,313 · Current $2,657 Reduced
General-duty citation text
29 CFR 1910.178(q)(1): Any power-operated industrial truck not in safe operating condition was not taken out of service, and/or repairs were not made by authorized personnel: (a) On or about 09/08/2022 - Warehouse, employees operated a Hyundai - Model 30D-7E - Type D powered industrial truck that was missing the mast.
Recent events (2)
- — I (O) $2656.5
- — Z (S) $5313
1910.219 E01 I
- Issued
- Jan 30, 2023
- Abate by
- Mar 6, 2023
- Penalty
- Initial $5,313 · Current $3,188 Reduced
General-duty citation text
1910.219(e)(1)(i): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o): (a) On or about 09/08/2022 - Shaker Table, employees were exposed to in-running-nip points from an unguarded motor and wheel driven by a 5/8 -inch belt and operating at 1458 feet/min while separating gates from parts.
Recent events (2)
- — I (S) $3187.8
- — Z (S) $5313
1910.219 E03 I
- Issued
- Jan 30, 2023
- Abate by
- Feb 24, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): (a) On or about 09/08/2022 - Shaker Table, employees were exposed to in-running-nip points from an unguarded motor and wheel driven by a 5/8 -inch belt and operating at 1458 feet/min while separating gates from parts.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Talladega Foundry & Machine Company, INC.
View Talladega Foundry & Machine Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 331511)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346206675.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.