SECAUCUS, NJ —
OSHA Inspection: GGI GLASS DISTRIBUTORS CORP
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of GGI GLASS DISTRIBUTORS CORP in 101 VENTURE WAY, SECAUCUS, NJ 07094 (NAICS 327215). OSHA activity number 346221351.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GGI GLASS DISTRIBUTORS CORP
- Site address
- 101 VENTURE WAY
- City
- SECAUCUS
- State
- NJ
- ZIP
- 07094
- Mailing
- 101 VENTURE WAY, SECAUCUS, NJ 07094
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327215
- Employees
- 176
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 II B
- Issued
- Mar 8, 2023
- Abate by
- Apr 28, 2023
- Penalty
- Initial $14,063 · Current $10,547 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy. a. 101 Venture Way Secaucus, NJ On or about September 8, 2022, while performing maintenance and servicing on Shenzhen Handong Horizontal Glass Washing Machine, employees were exposed to caught in and amputation hazards in that machine specific procedures were not established outlining steps to control hazardous energy.
Recent events (2)
- — I (S) $10547.25
- — Z (S) $14063
1910.147 D04 I
- Issued
- Mar 8, 2023
- Abate by
- Apr 28, 2023
- Penalty
- Initial $14,063 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: a. 101 Venture Way Secaucus, NJ The employer did not ensure lockout/tagout devices were used during service and maintenance of equipment. The violation occurred on or about September 8, 2022, in the facility, were an employee conducted maintenance on equipment without using lockout/tagout devices, exposing employees to caught-in and struck-by hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $14063
1910.147 C06 I
- Issued
- Mar 8, 2023
- Abate by
- Mar 21, 2023
- Penalty
- Initial $14,063 · Current $10,547 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a. 101 Venture Way Secaucus, NJ The employer did not ensure periodic inspection of energy control procedures at least annually. The violation was occurred on or about September 12, 2022, in the facility, were employees conducted maintenance on equipment with energy control procedures that were not evaluated to ensure the requirement of this standard were being followed, exposing employees to caught-in and struck-by hazards.
Recent events (2)
- — I (S) $10547.25
- — Z (S) $14063
1910.147 F01 I
- Issued
- Mar 8, 2023
- Penalty
- Initial $14,063 · Current $10,547 Reduced
General-duty citation text
29 CFR 1910.147(f)(1): When lockout or tagout devices were temporarily removed from the energy isolating device and the machine or equipment was energized to test or position the machine, equipment or component thereof, the sequence or actions in 29 CFR 1910.147(f)(1)(i) through (f)(1)(v) were not followed: a. 101 Venture Way Secaucus, NJ The employer failed to implement their energy control procedure when an employee was exposed to amputation hazards posed by ingoing nip points and rotating parts while servicing the Horizontal Glass Washing Machine. Violation occurred on or about 09/08/2022
Recent events (2)
- — I (S) $10547.25
- — Z (S) $14063
1910.147 F01 II
- Issued
- Mar 8, 2023
- Abate by
- Apr 28, 2023
- Penalty
- Initial $14,063 · Current $10,547 Reduced
General-duty citation text
29 CFR 1910.147(f)(1)(ii): When lockout or tagout devices temporarily were removed from the energy isolating device and the machine or equipment was energized to test or position the machine, the employees were not removed from the machine or equipment area in accordance to the paragraph (e)(2): a. 101 Venture Way Secaucus, NJ The employer failed to implement their energy control procedure when an employee was exposed to amputation hazards posed by ingoing nip points and rotating parts while servicing the Horizontal Glass Washing Machine. Violation occurred on or about 09/08/2022
Recent events (2)
- — I (S) $10547.25
- — Z (S) $14063
More inspections at GGI Glass Distributors Corp
View GGI Glass Distributors Corp's full OSHA safety record →
More inspections in this industry (NAICS 327215)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346221351.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.