Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: KELLESVIG CUSTOM BUILDERS LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of KELLESVIG CUSTOM BUILDERS LLC in 7565 COLONIAL WAY, MIDDLETON, WI 53562 (NAICS 238130). OSHA activity number 346238132.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Kellesvig Custom Builders LLC — free Get an email when a new federal OSHA severe-injury report for Kellesvig Custom Builders LLC is published. One employer, no account, unsubscribe in one click.
Site address
7565 COLONIAL WAY
City
MIDDLETON
State
WI
ZIP
53562
Mailing
2945 MAPLE RUN DRIVE, MADISON, WI 53719
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
4
Ownership type
A

5 citations on file for this inspection.

1910.178 L01 I

Serious Gravity 5 1 instance 2 exposed
Issued
Oct 7, 2022
Abate by
Oct 24, 2022
Penalty
Initial $3,108 · Current $1,865 Reduced
29 CFR  1910.178(l)(1)(i):The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  a) On or about September 21, 2022,  at the previously addressed inspection site, the employer did not ensure that each operator of the Genie forklift model GTH844 had successfully completed training and evaluation.  Abatement certification is required for this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (2)
  • — I (S) $1864.8
  • — Z (S) $3108

1926.451 A06

Serious Gravity 5 1 instance 1 exposed
Issued
Oct 7, 2022
Abate by
Oct 24, 2022
Penalty
Initial $3,108 · Current $1,865 Reduced
29 CFR  1926.451(a)(6):Scaffolds were not designed by a qualified person.  a) On or about September 21, 2022, at the previously addressed inspection site, employees were working from a plywood platform raised by a forklift that was not designed by a qualified person exposing employees to falls and hazards associated with falls.   Abatement certification is required for this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (2)
  • — I (S) $1864.8
  • — Z (S) $3108

1926.451 C02 V

Serious Gravity 5 1 instance 1 exposed
Issued
Oct 7, 2022
Abate by
Oct 24, 2022
Penalty
Initial $3,108 · Current $0 Reduced
29 CFR  1926.451(c)(2)(v):The employer used forklifts  to support scaffold platforms without ensuring that the entire platform was attached to the fork and that the forklift was not moved horizontally while the platform was occupied.  a) On or about September 21, 2022, at the previously addressed inspection site, employees were working from an elevated plywood platform that was not attached to the forks of the forklift exposing the employees to falls and hazards associated with falls.  Abatement certification is required for this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (2)
  • — I (S) $0
  • — Z (S) $3108

1926.451 G01

Serious Gravity 5 1 instance 1 exposed
Issued
Oct 7, 2022
Abate by
Oct 24, 2022
Penalty
Initial $3,108 · Current $2,486 Reduced
29 CFR  1926.451(g)(1):Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section.  a) On or about September 21, 2022, at the previously addressed inspection site, employees were working from an elevated plywood platform about 15 feet above lower levels without protection from falls to the lower levels.  Abatement certification is required for this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (2)
  • — I (S) $2486.4
  • — Z (S) $3108

1926.501 B13

Serious Gravity 5 1 instance 3 exposed
Issued
Oct 7, 2022
Penalty
Initial $3,108 · Current $1,554 Reduced
29 CFR  1926.501(b)(13):Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b).  a) On or about September 21, 2022, at the previously addressed inspection site,  employees framing and sheathing a residential building were not protected from falls of greater than 15 feet to lower levels.   b) On or about September 21, 2022, at the previously addressed inspection site,  employees framing and sheathing a residential building were not protected from falls of greater than 15 feet to lower levels at the unguarded window openings.   c) On or about September 21, 2022, at the previously addressed inspection site,  employees framing and sheathing a residential building were not protected from falls of greater than 8 feet to the lower levels at the unguarded/unprotected opening in the roof.    There is no abatement certification or documentation required for this item.
Recent events (2)
  • — I (S) $1554
  • — Z (S) $3108

View Kellesvig Custom Builders LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346238132.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.