DALTON, GA —
OSHA Inspection: DCI MANUFACTURING INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of DCI MANUFACTURING INC. in 233 BRICKYARD RD, DALTON, GA 30720 (NAICS 339999). OSHA activity number 346249337.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DCI MANUFACTURING INC.
- Site address
- 233 BRICKYARD RD
- City
- DALTON
- State
- GA
- ZIP
- 30720
- Mailing
- 233 BRICKYARD RD, DALTON, GA 30720
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339999
- Employees
- 100
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.134 E01
- Issued
- Mar 8, 2023
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1910.134(e)(1):The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: a) Flikr Fabrication area: On or about September 27, 2022, and at times prior, the employer exposed employees to respiratory hazards, in that a medical evaluation was not provided to employees wearing a half face respirator while working in the Flikr fabrication area.
Recent events (1)
- — Z (O) $0
1910.134 F01
- Issued
- Mar 8, 2023
- Abate by
- Apr 3, 2023
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT): a) Flikr Fabrication area: On or about September 27, 2022, and at times prior, the employer exposed employees to respiratory hazards, in that a fit test was not provided to employees wearing a half face respirator while working in the Flikr fabrication area.
Recent events (1)
- — Z (O) $0
1910.134 H02 I
- Issued
- Mar 8, 2023
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1910.134(h)(2)(i): Respirators were not stored to protect them from damage, contamination, dust, sunlight, extreme temperatures, excessive moisture, and damaging chemicals or were not packed or stored to prevent deformation of the facepiece and exhalation valve: a) Flikr Fabrication area: On or about September 27, 2022, and at times prior, the employer exposed employees to respiratory hazards, in that proper respirator storage was not provided to employees wearing a half face respirator while working in the Flikr fabrication area.
Recent events (1)
- — Z (O) $0
1910.134 K
- Issued
- Mar 8, 2023
- Abate by
- Apr 3, 2023
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1910.134(k): The employer did not provide comprehensive, understandable training which did not occur annually and/or more often if necessary: a) Flikr Fabrication area: On or about September 27, 2022, and at times prior, the employer exposed employees to respiratory hazards, in that respirator training was not provided to employees wearing a half face respirator while working in the Flikr fabrication area.
Recent events (1)
- — Z (O) $0
1910.1053 J03 I A
- Issued
- Mar 8, 2023
- Abate by
- Apr 3, 2023
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1910.1053(j)(3)(i)(A):The employer did not ensure that each employee covered by this section could demonstrate knowledge and understanding of the health hazards associated with exposure to respirable crystalline silica: a) Flikr Fabrication Area: On or about September 27, 2022, and at times prior, the employer exposed employees to respiratory hazards, in that silica hazard training was not provided to employees working in the Flikr fabrication area.
Recent events (1)
- — Z (O) $0
More inspections at DCI Manufacturing INC.
View DCI Manufacturing INC.'s full OSHA safety record →
More inspections in this industry (NAICS 339999)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346249337.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.