OSHA Inspection: OSCAR CORVERA RIVERA

Issued

2022-12-29 00:00:00

Abate by

2023-01-30 00:00:00

Penalty

Initial $2486.00 · Current $2486.00

General-duty citation text

29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.  At the job site, employees were not provided eye protection when operating a Makita right hand angle grinder while cutting bricks and stone were exposed to eye injuries from flying objects.

Issued

2022-12-29 00:00:00

Abate by

2023-01-30 00:00:00

Penalty

Initial $1865.00 · Current $1865.00

General-duty citation text

29 CFR 1910.134(a)(2):  A respirator was not provided by the employer to each employee when such equipment was necessary to protect the health of the employee: (Construction Reference 1926.103)  At the jobsite, employees who were cutting masonry stone with a Makita cutting saw were not protected with personal protective equipment and exposed to respiratory hazards from the dust, silica dust and particles.

Issued

2022-12-29 00:00:00

Abate by

2023-01-30 00:00:00

Penalty

Initial $2486.00 · Current $2486.00

General-duty citation text

29 CFR  1926.300(b)(1): When power operated tools are designed to accommodate guards, they shall be equipped with such guards when in use.    At the jobsite, employees operating a Makita 14" right hand angle saw blade was not equipped with a guard while cutting concrete stone/brick, exposing employees to amputation hazards.

Issued

2022-12-29 00:00:00

Abate by

2023-01-30 00:00:00

Penalty

Initial $3108.00 · Current $3108.00

General-duty citation text

29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii).  At the construction site, employees were working on a welded frame scaffold that was not fully planked. The employees performing masonry activities were exposed to a 10 feet fall hazard.

Issued

2022-12-29 00:00:00

Abate by

2023-01-30 00:00:00

Penalty

Initial $3108.00 · Current $3108.00

General-duty citation text

29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used.  Crossbraces were used as a means of access.  At the construction site, employees were working on a welded frame scaffold without ladder access. The employees performing masonry activities on the ground below were exposed to a fall hazard.

Issued

2022-12-29 00:00:00

Abate by

2023-01-30 00:00:00

Penalty

Initial $4351.00 · Current $4351.00

General-duty citation text

29 CFR 1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms.  At the construction site, employees were working on a welded frame scaffold without guardrails. The employees performing masonry activities were exposed to a 10 feet fall hazard.

Issued

2022-12-29 00:00:00

Abate by

2023-01-09 00:00:00

Penalty

Initial $2486.00 · Current $2486.00

General-duty citation text

29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards.  At the construction site, employees were working on a welded frame scaffold without trained to recognize and remove hazards.  The employees performing masonry activities on the ground below were exposed to being struck by material falling from above and fall hazards.

Issued

2022-12-29 00:00:00

Abate by

2023-01-30 00:00:00

Penalty

Initial $1865.00 · Current $1865.00

General-duty citation text

29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.   At the construction site, the employer did not ensure that employees using a Makita right hand angle saw to cut bricks/stone were protected from being exposed to silica dust with the use of engineering controls, work practices and respiratory protection.

Issued

2022-12-29 00:00:00

Abate by

2023-01-30 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section:   At the residential construction site, the employer did not assess the exposure for employees using a Makita right hand angle saw to cut bricks and stones. Employees were potentially exposed to silica.