Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CASTLE MASONRY, INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of CASTLE MASONRY, INC. in 2913 W. BELMONT AVENUE, CHICAGO, IL 60618 (NAICS 238140). OSHA activity number 346313042.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Castle Masonry, INC. — free Get an email when a new federal OSHA severe-injury report for Castle Masonry, INC. is published. One employer, no account, unsubscribe in one click.
Site address
2913 W. BELMONT AVENUE
City
CHICAGO
State
IL
ZIP
60618
Mailing
3108 W. GRACE STREET, CHICAGO, IL 60618
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
5
Ownership type
A

6 citations on file for this inspection.

1910.1200 E01

Serious Gravity 5 1 instance 3 exposed
Issued
Mar 15, 2023
Abate by
Apr 10, 2023
Penalty
Initial $3,349 · Current $1,750 Reduced

Hazardous substances 9000

29 CFR  1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (Construction Reference: 29 CFR 1926.59)  a) On October 28, 2022, Castle Masonry, Inc. did not develop or implement a written hazard communication program in accordance with 29 CFR 1910.1200(e)(1) that would describe or include at least the following:  1) Requirement for labeling and other forms of warning; 2) Safety data sheet availability; 3) Employee information and training; 4) A list of hazardous chemicals known to be present in the workplace;  5) Methods to inform employees of the hazards on non-routine tasks; and  6) Methods to provide other employer(s) access to safety data sheet; information on any precautionary measures and the labeling system used in the workplace.  Employees were exposed to hazardous chemicals including but not limited to crystalline silica when cutting a hole in the brick wall for support beams using a STIHL TS 420 handheld power saw.
Recent events (2)
  • — I (S) $1750
  • — Z (S) $3349

1926.1153 I01

Serious Gravity 5 1 instance 3 exposed
Issued
Mar 15, 2023
Abate by
Apr 10, 2023
Penalty
Initial $0 · Current $0

Hazardous substances 9000

29 CFR  1926.1153(i)(1): The employer did not include respirable crystalline silica in the program established to comply with the hazard communication standard (29 CFR 1910.1200):     a) On October 28, 2022, Castle Masonry, Inc. did not include respirable crystalline silica in the program established to comply with the hazard communication standard (29 CFR 1910.1200). Employees were exposed to crystalline silica when cutting a hole in the brick wall for support beams using a STIHL TS 420 handheld power saw.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1153 I02 I

Serious Gravity 5 1 instance 3 exposed
Issued
Mar 15, 2023
Abate by
Apr 10, 2023
Penalty
Initial $0 · Current $0

Hazardous substances 9000

29 CFR  1926.1153(i)(2)(i): The employer did not ensure that each employee covered by this section could demonstrate knowledge and understanding of at least the information contained in paragraphs (i)(2)(i)(A)-(i)(2)(i)(F) of this standard.  a) On October 28, 2022, Castle Masonry, Inc. did not ensure that each affected employee was trained in accordance with the provisions contained in paragraphs (i)(2)(i)(A)-(i)(2)(i)(F) of this standard when working with silica-containing materials. Employees were exposed to crystalline silica when cutting a hole in the brick wall for support beams using a STIHL TS 420 handheld power saw.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1153 C01

Serious Gravity 5 1 instance 3 exposed
Issued
Mar 15, 2023
Penalty
Initial $3,349 · Current $1,750 Reduced

Hazardous substances 9000

29 CFR  1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.  a) On October 28, 2022, Castle Masonry, Inc. did not fully and properly implement the engineering controls, work practices and respiratory protection specified for the task on Table 1. Exposure for this jobsite occurred when employees were cutting a hole in the brick wall for support beams using a STIHL TS 420 handheld power saw.
Recent events (2)
  • — I (S) $1750
  • — Z (S) $3349

1926.1153 D02 I

Serious Gravity 5 1 instance 3 exposed
Issued
Mar 15, 2023
Penalty
Initial $0 · Current $0

Hazardous substances 9000

29 CFR  1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section:  a) On October 28, 2022, Castle Masonry, Inc. did not assess the exposure to crystalline silica for each employee exposed at the jobsite. Exposure for this jobsite occurred when employees were cutting a hole in the brick wall for support beams using a STIHL TS 420 handheld power saw.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1153 G01

Serious Gravity 5 1 instance 3 exposed
Issued
Mar 15, 2023
Abate by
Apr 10, 2023
Penalty
Initial $0 · Current $0

Hazardous substances 9000

29 CFR  1926.1153(g)(1): The employer did not establish and implement a written exposure control plan:  a) On October 28, 2022, Castle Masonry, Inc. did not establish and implement a site-specific written exposure control plan. Exposure for this jobsite occurred when employees were cutting a hole in the brick wall for support beams using a STIHL TS 420 handheld power saw.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Castle Masonry, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346313042.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.