GAINESVILLE, TX —
OSHA Inspection: GAINESVILLE PRINTING COMPANY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of GAINESVILLE PRINTING COMPANY, INC. in 204 DENISON STREET, GAINESVILLE, TX 76240 (NAICS 323111). OSHA activity number 346320492.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GAINESVILLE PRINTING COMPANY, INC.
- Site address
- 204 DENISON STREET
- City
- GAINESVILLE
- State
- TX
- ZIP
- 76240
- Mailing
- 204 DENISON STREET, GAINESVILLE, TX 76240
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 323111
- Employees
- 16
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.215 A04
- Issued
- Nov 7, 2022
- Penalty
- Initial $2,113 · Current $1,268 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work. On or about November 2, 2022, and at times prior thereto, the employer did not ensure a work rest was installed prior to employees operating RYOBI bench grinder exposing them to struck-by hazards.
Recent events (2)
- — I (S) $1267.8
- — Z (S) $2113
1910.215 B09
- Issued
- Nov 7, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch. On or about November 2, 2022, and at times prior thereto, the employer did not ensure adjustable tongue guards were installed prior to employees operating the RYOBI bench grinder exposing them to struck-by hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 G01 IV B
- Issued
- Nov 7, 2022
- Abate by
- Dec 7, 2022
- Penalty
- Initial $2,486 · Current $1,492 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(B): Flexible cords and/or cables were run through holes in walls, ceilings, or floors: On or about November 2, 2022, and at times prior thereto, flexible cords running through the ceilings to energize machines at the following locations: a. Flexible cord protruding out a hole in the ceiling powering the Fujifilm ink jet press machine exposing employees to electrical and fire hazards; b. Flexible cord protruding out a hole in the ceiling powering the Horizon binder machine exposing employees to electrical and fire hazards.
Recent events (2)
- — I (S) $1491.6
- — Z (S) $2486
1910.178 L04 III
- Issued
- Nov 7, 2022
- Abate by
- Dec 7, 2022
- Penalty
- Initial $465 · Current $279 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: On or about November 2, 2022, and at times prior thereto, the employer did not ensure powered industrial truck operators was provided training and evaluation as required every three years exposing employees to struck-by hazards.
Recent events (2)
- — I (O) $279
- — Z (O) $465
1910.303 B01 IV
- Issued
- Nov 7, 2022
- Penalty
- Initial $465 · Current $279 Reduced
General-duty citation text
29 CFR 1910.303(b)(1)(iv): Electrical insulation was not free from recognized hazards that were likely to cause death or serious physical harm to employees: On or about November 2, 2022, and at times prior thereto, the Gabe air pump had exposed live wiring exposing employees to electrical shock hazards.
Recent events (2)
- — I (O) $279
- — Z (O) $465
1910.305 B02 I
- Issued
- Nov 7, 2022
- Penalty
- Initial $465 · Current $279 Reduced
General-duty citation text
29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy:(a) On or about November 2, 2022, and at times prior thereto, in the small press room, the employees were exposed to electrical injuries due to an electrical outlet missing the cover plate.
Recent events (2)
- — I (O) $279
- — Z (O) $465
More inspections at Gainesville Printing Company, INC.
View Gainesville Printing Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 323111)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346320492.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.