2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17
Safety Incidents OSHA Severe Injury Reports · 2015–2025

OSHA Inspection: PABLO NAVARRO

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of PABLO NAVARRO in 3703 JOB DR, ENNIS, TX 75119 (NAICS 238130). OSHA activity number 346322068.

Watch Pablo Navarro — free Get an email when a new federal OSHA severe-injury report for Pablo Navarro is published. One employer, no account, unsubscribe in one click.
Establishment
PABLO NAVARRO
Site address
3703 JOB DR
City
ENNIS
State
TX
ZIP
75119
Mailing
53 TIMBERRIDGE DRIVE, ROWLETT, TX 75089
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
4
Ownership type
A

6 citations on file for this inspection.

1926.100 A

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $2486.00 · Current $2486.00
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns.  At the jobsite, employees were not wearing hardhats while working below other employees that were framing a residential house, exposing employees to struck-by hazards from falling objects.
Recent events (1)
  • — Z (S) $2486

1926.102 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2486.00 · Current $2486.00
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents.   At the jobsite, employees operating Hitachi nail guns while performing framing activities were not wearing eye protection, exposing employees to the hazard of being struck by flying objects.
Recent events (1)
  • — Z (S) $2486

1926.403 B01 I

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $3729.00 · Current $3729.00
29 CFR 1926.403(b)(1)(i): Safety of equipment was not determined on the basis of suitability of the equipment for an identified purpose as evidenced by listing, labeling, or certification for that identified purpose.   At the construction site, the six outlet electrical receptacle box that was not approved by listing and labeling and manufacture design, with the design and method made and used by the employer, to energize hand held power equipment exposing employees to the hazard of electrical shock.
Recent events (1)
  • — Z (S) $3729

1926.405 B02

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.405(b)(2): All pull boxes, junction boxes, and fittings were not provided with covers:   At the construction site, the electrical receptacle box was not equipped with a cover plate, exposing employees to the hazard of electrical shock.
Recent events (1)
  • — Z (S) $0

1926.501 B13

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $4351.00 · Current $4351.00
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system.   At the jobsite, employees engaged in framing activities at a height of over 6 feet were not protected by a fall arrest system. Employees were exposed to an unprotected fall of over 10 feet to the ground below.
Recent events (1)
  • — Z (S) $4351

1926.503 A01

Other-than-serious 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $349.00 · Current $349.00
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  At the jobsite, the employer did not provide a training program with hazard recognition and avoidance training where employees were performing framing activities above 6 feet without fall protection and exposed to fall hazards at a heights of approximately 10 feet to the ground below.
Recent events (1)
  • — Z (O) $349

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346322068.