HALTOM CITY, TX —
OSHA Inspection: MICA STEELWORKS
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MICA STEELWORKS in 4201 OLD DENTON ROAD, HALTOM CITY, TX 76117 (NAICS 331210). OSHA activity number 346324544.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MICA STEELWORKS
- Site address
- 4201 OLD DENTON ROAD
- City
- HALTOM CITY
- State
- TX
- ZIP
- 76117
- Mailing
- 4201 OLD DENTON ROAD, HALTOM CITY, TX 76117
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331210
- Employees
- 104
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C04 I
- Issued
- Dec 9, 2022
- Abate by
- Jan 10, 2023
- Penalty
- Initial $13,052 · Current $7,831 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about November 3, 2022 and times prior there to, the employer did not establish a complete lockout tagout (LOTO) program that included but not limited to, specific LOTO procedures for each type of machine operated on by employees.
Recent events (2)
- — I (S) $7831.2
- — Z (S) $13052
1910.305 B01 II
- Issued
- Dec 9, 2022
- Abate by
- Jan 10, 2023
- Penalty
- Initial $9,324 · Current $5,594 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii):Unused openings in boxes, cabinets, or fittings were not effectively closed. On or about November 3, 2022 and times prior there to, unused openings in live electrical cabinets were not effectively closed or protected against accidental contact in the following instances: a) Junction Box near the V-25 HYD-Mech Bandsaw b) Junction Box near power press in Fabrication Area
Recent events (2)
- — I (S) $5594.4
- — Z (S) $9324
1910.132 D01
- Issued
- Dec 9, 2022
- Abate by
- Jan 10, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(1):The employer did not assess the workplace to determine if hazards were present, or were likely to be present, which necessitated the use of personal protective equipment. On or about November 3, 2022 and times prior there to, a hazard assessment was not performed that address if hazards were present, or were likely to be present, which necessitated the use of personal protective equipment to safeguard employees from the identified hazards that include but not limited to, hot surfaces, flying debris, sharp edges, chemical exposure and loud noises.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.157 E03
- Issued
- Dec 9, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(e)(3):Portable fire extinguishers were not subjected to an annual maintenance check. On or about November 3, 2022 and times prior there to, portable fire extinguishers (PFE) located in the facility were not being inspected on an annual basis.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.178 L01 I
- Issued
- Dec 9, 2022
- Abate by
- Jan 10, 2023
- Penalty
- Initial $1,047 · Current $628 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i):The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l). On or about November 3, 2022 and times prior there to, employees were allowed to operate powered industrial trucks without being deemed competent by the successful completion of the required training and evaluation process.
Recent events (2)
- — I (O) $628.2
- — Z (O) $1047
1910.179 J02
- Issued
- Dec 9, 2022
- Abate by
- Jan 10, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(j)(2): The following items were not be inspected for defects at intervals as defined in paragraph (j)(1)(ii) of this section or as specifically indicated, including observation during operation for any defects which might appear between regular inspections: On or about November 3, 2022 and times prior there to, the overhead gantry style cranes in the facility were not being inspected on a monthly basis and were not having the hook and cable inspection being documented as required.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 331210)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346324544.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.