Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: JACKSON METALWORKS, INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of JACKSON METALWORKS, INC. in 750 CLOLINGER RD, JACKSON, AL 36545 (NAICS 332710). OSHA activity number 346343767.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Jackson Metalworks, INC. — free Get an email when a new federal OSHA severe-injury report for Jackson Metalworks, INC. is published. One employer, no account, unsubscribe in one click.
Site address
750 CLOLINGER RD
City
JACKSON
State
AL
ZIP
36545
Mailing
P.O. BOX 6, JACKSON, AL 36545
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332710
Employees
14
Ownership type
A

9 citations on file for this inspection.

1910.134 C02 I

Serious Gravity 1 1 instance 2 exposed
Issued
Apr 13, 2023
Abate by
Apr 21, 2023
Penalty
Initial $2,678 · Current $1,700 Reduced
29 CFR  1910.134(c)(2)(i):The employer did not determine if the voluntary use of a respirator did not in itself create a hazard:  a)	Shop Area:  On or about November 16, 2022, and at times prior to, the employer allowed employees to voluntarily use a half mask tight-fitting respirators while welding and grinding without a medical evaluation.
Recent events (2)
  • — I (S) $1700
  • — Z (S) $2678

1910.134 E01

Deleted Serious Gravity 1 1 instance 1 exposed
Issued
Apr 13, 2023
Abate by
Apr 21, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.134(e)(1):The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  a)	Shop Area:  On or about November 16, 2022, and at times prior to, the employer exposed employees to respiratory hazards in that the employer failed to ensure employees required to use half mask tight-fitting respirators when welding and grinding on galvanized stainless-steel metal received a medical evaluation.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 F02

Deleted Serious Gravity 1 1 instance 2 exposed
Issued
Apr 13, 2023
Abate by
Apr 21, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.134(f)(2):Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator:  a)	Shop Area:  On or about November 16, 2022, and at times prior to, the employer failed to ensure employees weere fit tested prior to requiring employees to use half mask tight-fitting respirators while conducting welding and grinding work.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 K03

Deleted Serious Gravity 1 1 instance 1 exposed
Issued
Apr 13, 2023
Abate by
Apr 21, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.134(k)(3):Training was not provided prior to requiring employees to use a respirator in the workplace:  a)	Shop Area:  On or about November 16, 2022, and at times prior to, the employer failed to provide training on respirator use prior to requiring employees to use half mask tight-fitting respirators when conducting welding and grinding.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 K06

Serious Gravity 1 1 instance 2 exposed
Issued
Apr 13, 2023
Abate by
Apr 21, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.134(k)(6):The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer:  a)	Shop Area:  On or about November 16, 2022, and at times prior to, the employer failed to provide employees who voluntarily use half mask tight-fitting respirators with the information contained in Appendix D of 29 CFR 1910.134.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 I05 IV

Serious Gravity 5 1 instance 3 exposed
Issued
Apr 13, 2023
Abate by
Apr 21, 2023
Penalty
Initial $4,465 · Current $2,900 Reduced

Hazardous substances 0560

29 CFR  1910.134(i)(5)(iv):The employer did not ensure that compressors used to supply breathing air to respirators were constructed and situated so as to have a tag maintained at the compressor containing the most recent change date and the signature of the person authorized by the employer to perform the change:  a)	Sandblasting Area:  On or about November 16, 2022, and at times prior to, employees were exposed to inhalation and asphyxiation hazards from required use a Bullard supplied air respirator that has breathing air generated from an Eaton Compressor air compressor without a tag at the compressor indicating most recent change and signature of authorized person that performed the change.
Recent events (2)
  • — I (S) $2900
  • — Z (S) $4465

1910.134 I07

Serious Gravity 5 1 instance 3 exposed
Issued
Apr 13, 2023
Abate by
Jun 8, 2023
Penalty
Initial $0 · Current $0

Hazardous substances 0560

29 CFR  1910.134(i)(7):Oil lubricated compressor(s) used to supply breathing air did not have a high-temperature or carbon monoxide alarm(s) or both:  a)	Sandblasting Area:  On or about November 16, 2022, and at times prior to, employees were exposed to inhalation and asphyxiation hazards while conducting sandblasting job tasks using a Bullard supplied air respirator that has breathing air generated from an Eaton Compressor air compressor without a carbon monoxide or temperature alarm.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.212 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 13, 2023
Abate by
Apr 21, 2023
Penalty
Initial $5,358 · Current $3,400 Reduced
29 CFR  1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a)	ACCURPRESS press brake machine :  On or about December 6, 2022, and at times prior to, the employer exposed employees to amputation hazards by not ensuring the point of operation was properly guarded for the ACCURPRESS press brake machine while conducting metal bending job tasks.
Recent events (2)
  • — I (S) $3400
  • — Z (S) $5358

1910.134 I01 II

Other-than-serious 1 instance 1 exposed
Issued
Apr 13, 2023
Abate by
Apr 21, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.134(i)(1)(ii):Breathing air did not meet requirements for Grade D breathing air as described in the ANSI/Compressed Gas Association Commodity Specification G-7.1-1989:  a)	Sandblasting Area:  On or about November 16, 2022, and at times prior to, the employer failed to ensure breathing air was Grade D quality when employees used a Bullard supplied air sandblasting helmet during sandblasting work that has breathing air generated from an Easton Compressor oil-based air compressor.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Jackson Metalworks, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346343767.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.