CHANDLER, AZ —
OSHA Inspection: KT FABRICATION INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of KT FABRICATION INC in 6872 W WILLIS ROAD, CHANDLER, AZ 85226 (NAICS 238150). OSHA activity number 346346612.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- KT FABRICATION INC
- Site address
- 6872 W WILLIS ROAD
- City
- CHANDLER
- State
- AZ
- ZIP
- 85226
- Mailing
- 501 E COMSTOCK DRIVE ATTN: JUSTIN TIDWELL, CHANDLER, AZ 85225
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238150
- Employees
- 12
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.179 J03
- Issued
- Dec 28, 2022
- Abate by
- Jan 10, 2023
- Penalty
- Initial $4,895 · Current $3,232 Reduced
General-duty citation text
29 CFR 1910.179(j)(3):A complete periodic inspection of crane(s) had not been conducted in the past 12 months: a) SOUTH CRANE: Employees used a Gorbel 2000lb crane that had not been inspected in the previous 12 months, exposing them to crush-by hazards from falling items. b) NORTH CRANE: Employees used a Gorbel 2000lb crane that had not been inspected in the previous 12 months, exposing them to crush-by hazards from falling items. c) PACKAGING AREA : Employees used a Gorbel 4000lb crane that had not been inspected in the previous 12 months, exposing them to crush-by hazards from falling items.
Recent events (3)
- — F (S) $3232
- — C (S) $4895
- — Z (S) $4895
1910.303 B02
- Issued
- Dec 28, 2022
- Penalty
- Initial $4,161 · Current $8,322
General-duty citation text
29 CFR 1910.303(b)(2):Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: a) YARD ASSEMBLY AREA- Two 15-amp relocatable power taps were "daisy chained" together, exposing employees to electrical shock and fire hazards. b) YARD ASSEMBLY AREA- Four 3-way current taps were powered by extension cords, exposing employees to electrical shock and fire hazards. c) YARD ASSEMBLY AREA- Two 100 ft extension cords were "daisy chained" together, exposing employees to electrical shock and fire hazards. d) YARD ASSEMBLY AREA- Two 15-amp extension cords and 2 power taps were "daisy chained" together, exposing employees to electrical shock and fire hazards. e) YARD ASSEMBLY AREA- An extension cord was plugged into a triple tap cord, exposing employees to electrical shock and fire hazards. f) YARD ASSEMBLY AREA- An extension cord plugged into a second extension cord were "daisy chained" together, exposing employees to electrical shock and fire hazards. g) TRIM AREA- two 3-way current taps were powered by extension cords, exposing employees to electrical shock and fire hazards. h) TRIM AREA-A relocatable power tap connected to red extension cord was connected to a triple tap extension cord and powered two additional extension cords, exposing employees to electrical shock and fire hazards. i) PACKAGING AREA- A relocatable power tap was plugged into an extension cord, exposing employees to electrical shock and fire hazards. j) PACKAGING AREA- Two extension cords and a relocatable power tap were "daisy chained" together, exposing employees to electrical shock and fire hazards.
Recent events (3)
- — F (S) $8322
- — C (S) $4161
- — Z (S) $4161
1910.305 G01 IV A
- Issued
- Dec 28, 2022
- Penalty
- Initial $4,161 · Current $0 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A):Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: a) YARD ASSEMBLY AREA : Extension cords, 3-way current taps, and relocatable power taps were used to provide power to the open sided structure in place of permanent wiring, exposing employees to shock and fire hazards. b) TRIM AREA: Extension cords, 3-way current taps, and relocatable power taps were used to provide power to the open sided structure in place of permanent wiring, exposing employees to shock and fire hazards. c) PACKAGING AREA : Extension cords and a relocatable power tap were used to provide power to open sided structure in place of permanent wiring, exposing employees to shock and fire hazards.
Recent events (3)
- — F (S) $0
- — C (S) $4161
- — Z (S) $4161
1910.305 G01 IV B
- Issued
- Dec 28, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(B):Flexible cords and/or cables were run through holes in walls, ceilings, or floors: a) NORTH END OF SHOP: A 100 foot extension cord was run through the wall to provide power to fans and batteries outside in the yard, exposing employees to fire and electrocution hazards
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.305 G01 IV F
- Issued
- Dec 28, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(F): Flexible cords and/ or cables were installed in raceways a) YARD ASSEMBLY AREA: An extension cord used to provide power to an open sided steel structure had been run through unsupported conduit, exposing employees to electrical hazards. b) YARD ASSEMBLY AREA: An extension cord used to provide power to an open sided steel structure had been run through unsupported conduit, exposing employees to electrical hazards.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.334 A02 II
- Issued
- Dec 28, 2022
- Penalty
- Initial $4,161 · Current $3,332 Reduced
General-duty citation text
29 CFR 1910.334(a)(2)(ii):There was a defect or evidence of damage that could have exposed an employee to injury and the defective or damaged item was not removed from service: a) NORTHEAST YARD: A 100 foot extension cord had cuts in the outer jacket and remained in service providing power to the outside yard, exposing employees to electrical hazards. b) PACKAGING AREA: The yellow outer jacket of an extension cord had separated from the plug attachment revealing the inner wires, exposing employees to electrical hazards.
Recent events (3)
- — F (S) $3332
- — C (S) $4161
- — Z (S) $4161
More inspections at KT Fabrication INC
View KT Fabrication INC's full OSHA safety record →
More inspections in this industry (NAICS 238150)
More inspections in AZ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346346612.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.