Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ABRAMS CARPENTRY, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ABRAMS CARPENTRY, LLC in 2920 ARBOR EDGE CROSSING, TEXAS CITY, TX 77590 (NAICS 238130). OSHA activity number 346346919.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Abrams Carpentry, LLC — free Get an email when a new federal OSHA severe-injury report for Abrams Carpentry, LLC is published. One employer, no account, unsubscribe in one click.
Site address
2920 ARBOR EDGE CROSSING
City
TEXAS CITY
State
TX
ZIP
77590
Mailing
14219 WILLOW MOUNTAIN LANE, HOUSTON, TX 77047
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

10 citations on file for this inspection.

1926.100 A

Serious Gravity 1 1 instance 2 exposed
Issued
Feb 1, 2023
Penalty
Initial $2,009 · Current $1,205 Reduced
29 CFR  1926.100(a): Employees exposed to possible head injury from falling or flying objects or from impact with hand tools, equipment and building materials during construction operations were not wearing hard hats:  a) At this jobsite, employees were exposed to struck-by hazards when they did not wear hard hats.
Recent events (2)
  • — I (S) $1205
  • — Z (S) $2009

1926.102 A01

Serious Gravity 5 2 instances 2 exposed
Issued
Feb 1, 2023
Penalty
Initial $2,277 · Current $1,366 Reduced
29 CFR  1926.102(a)(1):  Employees did not use eye and face protection equipment when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents:  a) At the jobsite, an employee was exposed to struck-by hazards while operating a nail gun without wearing eye protection.   b) At the jobsite, an employee was exposed to struck-by hazards while operating a DeWalt 7.25-inch circular saw without wearing eye protection.
Recent events (2)
  • — I (S) $1366
  • — Z (S) $2277

1926.300 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 1, 2023
Penalty
Initial $2,846 · Current $1,707 Reduced
29 CFR  1926.300(b)(1):  Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use:  a) At the jobsite, an employee was exposed to amputation hazards while operating a DeWalt DWE575, 7.25-inch circular saw with a piece of wood wedged against the blade guard to prevent the guard from engaging.
Recent events (2)
  • — I (S) $1707
  • — Z (S) $2846

1926.451 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 1, 2023
Abate by
Feb 28, 2023
Penalty
Initial $3,349 · Current $2,009 Reduced
29 CFR  1926.451(b)(1):  Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii):  a) At the jobsite, an employee was exposed to a fall hazard of approximately 9-feet 9-inches when he worked on a single-pole wood pole scaffold that was not fully planked.
Recent events (2)
  • — I (S) $2009
  • — Z (S) $3349

1926.451 B05 I

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 1, 2023
Abate by
Feb 28, 2023
Penalty
Initial $0 · Current $0
29 CFR  1926.451(b)(5)(i):  The end of a platform 10 feet or less in length, extended over its support more than 12 inches:  a) At the jobsite, an employee was exposed to a fall hazard of approximately 9-feet 9-inches when he worked from an approximately 8-foot 3-inch long single-pole wood pole scaffold that had planks that extended approximately 21-inches and greater over its supports.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.501 B13

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 1, 2023
Abate by
Feb 28, 2023
Penalty
Initial $3,349 · Current $0 Reduced
29 CFR  1926.501(b)(13):  Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system:  a)  At the jobsite, an employee was exposed to a fall hazard of approximately 9-feet and greater while working from the framework of a house without using fall protection.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3349

1926.451 C02

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 1, 2023
Abate by
Feb 28, 2023
Penalty
Initial $3,349 · Current $2,009 Reduced
29 CFR  1926.451(c)(2):  Supported scaffold poles, legs, posts, frames,  or uprights did not bear on base plates and mud sills or other adequate firm foundation:  a) At the jobsite, an employee was exposed to a fall hazard of approximately 9-feet 8-inches when he worked from a wood pole single-pole scaffold that did not have base plates and mud sills installed underneath the scaffold poles.
Recent events (2)
  • — I (S) $2009
  • — Z (S) $3349

1926.452 A04

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 1, 2023
Abate by
Feb 28, 2023
Penalty
Initial $3,349 · Current $0 Reduced
29 CFR  1926.452(a)(4): Diagonal bracing in both directions were not installed across the entire outside face of all double- and single-pole scaffolds.   a) At the jobsite, an employee was exposed to a fall hazard of approximately 9-feet 8-inches when he worked from a single-pole wood pole scaffold without diagonal bracing installed.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3349

1926.452 A05

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 1, 2023
Abate by
Feb 28, 2023
Penalty
Initial $0 · Current $0
29 CFR  1926.452(a)(5):  Runners and/or bearers were not installed on edge:  a) At this jobsite, an employee was exposed to a fall of approximately 9-feet 8-inches when he worked from a single-pole wood pole scaffold that did not have runners installed.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1053 B04

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 1, 2023
Penalty
Initial $2,846 · Current $1,707 Reduced
29 CFR  1926.1053(b)(4):  Ladder(s) were used for purposes other than the purpose for which they were designed:  a) At the jobsite, an employee was exposed to a fall hazard of approximately 3-feet while using an unopened Werner 6-ft A-frame ladder leaned against a column of the porch.
Recent events (2)
  • — I (S) $1707
  • — Z (S) $2846

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346346919.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.