Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: PAT'S TIRE SALES & SERVICE, INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of PAT'S TIRE SALES & SERVICE, INC. in N4040 COUNTY ROAD C, CHILTON, WI 53014 (NAICS 811111). OSHA activity number 346396831.

Watch Pat'S Tire Sales & Service, INC. — free Get an email when a new federal OSHA severe-injury report for Pat'S Tire Sales & Service, INC. is published. One employer, no account, unsubscribe in one click.
Site address
N4040 COUNTY ROAD C
City
CHILTON
State
WI
ZIP
53014
Mailing
N4040 COUNTY ROAD C, CHILTON, WI 53014
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811111
Employees
25
Ownership type
A

8 citations on file for this inspection.

1910.132 D01

Serious Gravity 5 1 instance 12 exposed
Issued
Penalty
Initial $5358.00 · Current $3751.00 Reduced
29 CFR 1910.132(d)(1): The employer shall assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE).  On or about December 16, 2022, at an establishment located at N4040 County Road C in Chilton, Wisconsin; the employer did not assess the workplace to determine if hazards are present, or likely to be present, which necessitate the use of personal protective equipment (PPE) such as, but not limited to, safety glasses, hand protection, and foot protection. Employees servicing rim wheels were exposed to lacerations of the hands, flying particles, and heavy items falling.
Recent events (2)
  • — I (S) $3750.6
  • — Z (S) $5358

1910.177 C01

Serious Gravity 5 1 instance 12 exposed
Issued
Abate by
Penalty
Initial $4465.00 · Current $3126.00 Reduced
29 CFR 1910.177(c)(1): The employer shall provide a program to train all employees who service rim wheels in the hazards involved and the safety procedures to be followed.   On or about December 16, 2022, at an establishment located at N4040 County Road C in Chilton, Wisconsin; The employer did not provide a program and train employees in safety procedures to be followed when servicing single-piece and multi-piece rim wheels.   Training program elements are defined in paragraphs (c)(1)(i) through (c)(1)(iii) of this section. Employees shall be trained in the safe operating procedures described in paragraphs (f) and (g) of this section for multi-piece and single-piece rim wheels.
Recent events (2)
  • — I (S) $3125.5
  • — Z (S) $4465

1910.178 A04

Serious Gravity 5 1 instance 12 exposed
Issued
Penalty
Initial $4465.00 · Current $3126.00 Reduced
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation shall not be performed by the customer or user without manufacturers prior written approval. Capacity, operation, and maintenance instruction plates, tags, or decals shall be changed accordingly.  On or about December 16, 2022, at an establishment located at N4040 County Road C in Chilton, Wisconsin; the employer did not obtain written approval from the forklift manufacturer prior to the installation of an attachment on four forklifts. The right forks were modified with a hole drilled into the tip to secure the attachment with a pin. Capacity plates supplied on the vehicles did not include lifting capacity limitations nor safe operating instructions for the attachment.
Recent events (2)
  • — I (S) $3125.5
  • — Z (S) $4465

1910.1200 E01

Serious Gravity 5 1 instance 25 exposed
Issued
Abate by
Penalty
Initial $4465.00 · Current $3126.00 Reduced
29 CFR 1910.1200(e)(1): Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met.  On or about December 16, 2022, at an establishment located at N4040 County Road C in Chilton, Wisconsin; the employer did not implement, and maintain a hazard communication program for hazardous chemicals used and present in the workplace, including but not limited to, Spray Products Starting Fluid and Rim & Bead Sealer.
Recent events (2)
  • — I (S) $3125.5
  • — Z (S) $4465

1910.1200 E01 I

Serious Gravity 5 1 instance 25 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(e)(1)(i): A list of the hazardous chemicals known to be present using a product identifier that is referenced on the appropriate safety data sheet (the list may be compiled for the workplace as a whole or for individual work areas).  On or about December 16, 2022, at an establishment located at N4040 County Road C in Chilton, Wisconsin; the employer did not have a list of hazardous chemicals known to be present in the workplace.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 G08

Serious Gravity 5 1 instance 25 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.1200(g)(8): The employer shall maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and shall ensure that they are readily accessible during each work shift to employees when they are in their work area(s). (Electronic access and other alternatives to maintaining paper copies of the safety data sheets are permitted as long as no barriers to immediate employee access in each workplace are created by such options.)   On or about December 16, 2022, at an establishment located at N4040 County Road C in Chilton, Wisconsin; the employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical and ensure they were readily accessible during each work shift to employees.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H01

Serious Gravity 5 1 instance 25 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(h)(1): Employers shall provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new chemical hazard the employees have not previously been trained about is introduced into their work area. Information and training may be designed to cover categories of hazards (e.g., flammability, carcinogenicity) or specific chemicals. Chemical-specific information must always be available through labels and safety data sheets.  On or about December 16, 2022, at an establishment located at N4040 County Road C in Chilton, Wisconsin; the employer did not provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment. Employees were not provided training on the location of Safety Data Sheets (SDS), hazardous chemical container labeling, nor the hazards of the chemicals that employees were assigned to work with.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.178 L01 II

Other-than-serious 1 instance 12 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.178(l)(1)(ii): Prior to permitting an employee to operate a powered industrial truck (except for training purposes), the employer shall ensure that each operator has successfully completed the training required by this paragraph (l), except as permitted by paragraph (l)(5).   On or about December 12, 2022, to December 15, 2022, at an establishment located at N4040 County Road C in Chilton, Wisconsin; the employer did not ensure that an employee had successfully completed the training required by the standard prior to permitting the employee to operate the forklifts.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346396831.