Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: UPSLOPE, LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of UPSLOPE, LLC in 1898 S FLATIRON CT, BOULDER, CO 80301 (NAICS 312120). OSHA activity number 346406945.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Upslope, LLC — free Get an email when a new federal OSHA severe-injury report for Upslope, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
UPSLOPE, LLC
Site address
1898 S FLATIRON CT
City
BOULDER
State
CO
ZIP
80301
Mailing
1898 S FLATIRON CT, BOULDER, CO 80301
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
312120
Employees
50
Ownership type
A

7 citations on file for this inspection.

1910.22 A02

Serious Gravity 5 1 instance 14 exposed
Issued
Apr 6, 2023
Abate by
Apr 26, 2023
Penalty
Initial $6,250 · Current $4,000 Reduced
29 CFR 1910.22(a)(2): The employer did not ensure that the floor of each workroom is maintained in a clean and, to the extent feasible, in a dry condition. The employer did not ensure that when wet processes are used, drainage is be maintained and, to the extent feasible, dry standing places, such as false floors, platforms, and mats are provided.  (a)  On or about December 20, 2022, the employer did not ensure that the canning production area was maintained in a dry condition.  Water was leaking from the canning machine onto the floor, thus exposing employees to hazards associated with slipping and falling.
Recent events (2)
  • — I (S) $4000
  • — Z (S) $6250

1910.29 B02 I

Serious Gravity 5 1 instance 14 exposed
Issued
Apr 6, 2023
Abate by
Apr 26, 2023
Penalty
Initial $7,813 · Current $4,000 Reduced
29 CFR 1910.29(b)(2)(i): The employer did not ensure that guardrails met the requirement that midrails that are installed at a height midway between the top edge of the guardrail system and the walking-working surface.  (a)  On or about December 20, 2022, the employer did not ensure that all required safety devices located at the de-palletizer operator area were in working order, in that the mid-rail chain adjacent to the pallet of can separation sheets was not secured and the midrail for the de-palletizer elevator had been removed.  This condition exposed employees to a fall when working at heights of 96 inches while working at the de-palletizer station.
Recent events (2)
  • — I (S) $4000
  • — Z (S) $7813

1910.219 F03

Serious Gravity 5 1 instance 14 exposed
Issued
Apr 6, 2023
Abate by
Apr 26, 2023
Penalty
Initial $7,813 · Current $4,000 Reduced
29 CFR 1910.219(f)(3):  Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed:  (a) On or about December 20, 2022, the employer did not ensure that the sprocket wheels and chains, which power the de-palletizer elevator were guarded.  This condition exposed employees to hazards associated with nip points.
Recent events (2)
  • — I (S) $4000
  • — Z (S) $7813

1910.303 B07 I

Serious Gravity 5 2 instances 14 exposed
Issued
Apr 6, 2023
Abate by
Apr 26, 2023
Penalty
Initial $6,250 · Current $4,000 Reduced
29 CFR 1910.303(b)(7)(i):  Unused openings in boxes, raceways, auxiliary gutters, cabinets, equipment cases, or housings shall be effectively closed to afford protection substantially equivalent to the wall of the equipment:  (a) On or about December 20, 2022, the employer did not ensure covers were installed over two open slots in the L1E circuit breaker panel.  This condition exposed employees to hazards associated with exposure to 3 phase, 120 volts AC electricity.   (b) On or about December 20, 2022, the employer did not ensure covers were installed over five open slots in the 2C circuit breaker panel.  This condition exposed employees to hazards associated with exposure to 3 phase, 220 volts AC electricity.
Recent events (2)
  • — I (S) $4000
  • — Z (S) $6250

1910.303 F02

Serious Gravity 5 2 instances 50 exposed
Issued
Apr 6, 2023
Abate by
Apr 26, 2023
Penalty
Initial $0 · Current $0
29 CFR 1910.303(f)(2):  Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident:  (a) On or about December 20, 2022, the employer did not ensure circuit breaker L1E was properly labeled.  Each circuit breaker was not marked to indicate its purpose.  This condition exposed the employees electrical and mechanical hazards.  (b) On or about December 20, 2022, the employer did not ensure circuit breaker 2C was properly labeled.  Each circuit breaker was not marked to indicate its purpose.  This condition exposed the employees electrical and mechanical hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.305 G01 IV A

Serious Gravity 5 3 instances 20 exposed
Issued
Apr 6, 2023
Abate by
Apr 26, 2023
Penalty
Initial $6,250 · Current $4,000 Reduced
29 CFR 1910.305(g)(1)(iv)(A):  Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:  (a) On and before December 20, 2022, the employer used flexible cords to connect electrical power to approximately three electrical heating coils, used to warm a spent grain auger, moving spent grain to an exterior holding container located outside of the facility.  This condition electrical shock and/or fire hazards.  (b) On and before December 20, 2022, the employer used flexible cords to connect electrical power to various office equipment at a workstation, located in the maintenance area.  This condition electrical shock and/or fire hazards.  (c) On and before December 20, 2022, the employer used flexible cords to connect electrical power to a three-section reach-in refrigerator, located adjacent to the packaging area.    This condition electrical shock and/or fire hazard
Recent events (2)
  • — I (S) $4000
  • — Z (S) $6250

1910.305 G01 IV B

Serious Gravity 5 1 instance 5 exposed
Issued
Apr 6, 2023
Abate by
Apr 26, 2023
Penalty
Initial $0 · Current $0
29 CFR 1910.305(g)(1)(iv)(B):  Flexible cords and cables were run through holes in walls, ceilings, or floors:  (a) On and before December 20, 2022, the employer ran three flexible cords through a hole in the facility's exterior wall.  The cords were used to connect electrical power to approximately three electrical heating coils, used to warm a spent grain auger, which moves spent grain to an exterior holding container located outside of the facility.  This condition electrical shock and/or fire hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Upslope, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346406945.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.