Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: JBS GREEN BAY, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of JBS GREEN BAY, INC. in 1330 LIME KILN ROAD, GREEN BAY, WI 54311 (NAICS 311611). OSHA activity number 346422967.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch JBS Green BAY, INC. — free Get an email when a new federal OSHA severe-injury report for JBS Green BAY, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
JBS GREEN BAY, INC.
Site address
1330 LIME KILN ROAD
City
GREEN BAY
State
WI
ZIP
54311
Mailing
1330 LIME KILN ROAD, GREEN BAY, WI 54311
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
311611
Employees
1300
Ownership type
A

11 citations on file for this inspection.

1910.22 C

Serious Gravity 10 1 instance 1 exposed
Issued
Feb 26, 2024
Penalty
Initial $15,625 · Current $15,625
29 CFR  1910.22(c): (c) Access and egress.  The employer must provide, and ensure each employee uses, a safe means of access and egress to and from walking-working surfaces.    On or about March 1, 2023, at a workplace located at 1330 Lime Kiln Road, Green Bay, Wisconsin, in the Packaging Department; Employee(s) were not provided with safe access and egress from the Cyrovac 6 line as the width of the walkway to and from employees' workstations was measured at 10.5 inches due to a motor housing narrowing the walkway.
Recent events (3)
  • — F (S) $15625
  • — Z (S) $15625
  • — C (S) $15625

1910.22 C

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 13, 2023
Abate by
Jul 6, 2023
Penalty
Initial $9,822 · Current $15,625
29 CFR 1910.22(c): Access and egress. The employer must provide, and ensure each employee uses, a safe means of access and egress to and from walking-working surfaces:   a) On or about March 1, 2023, at a workplace located at 1330 Lime Kiln Road, Green Bay, Wisconsin, in the Packaging Department; Employee(s) were not provided with safe access and egress from the Cryovac 5 station as the width of the walkway to and from the operator's station was measured at 9.75 inches.
Recent events (3)
  • — F (S) $15625
  • — C (S) $9822
  • — Z (S) $9822

1910.23 B02

Serious Gravity 5 1 instance 5 exposed
Issued
Jun 13, 2023
Abate by
Jul 6, 2023
Penalty
Initial $12,278 · Current $15,625
29 CFR 1910.23(b)(2): Ladder rungs, steps, and cleats are spaced not less than 10 inches (25 cm) and not more than 14 inches (36 cm) apart, as measured between the centerlines of the rungs, cleats, and steps:  On or about January 6, 2023, at a workplace located at 1330 Lime Kiln Road, Green Bay, Wisconsin, in the Harvest Department; employees accessing the top of the Wash Cabinet were exposed to a potential fall hazard from the unevenly spaced top rung and the top of the wash cabinet.
Recent events (3)
  • — F (S) $15625
  • — C (S) $12278
  • — Z (S) $12278

1910.147 D06

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Jun 13, 2023
Penalty
Initial $9,822 · Current $0 Reduced
29 CFR 1910.147(d)(6): Verification of isolation. Prior to starting work on machines or equipment that have been locked out or tagged out, the authorized employee shall verify that isolation and deenergization of the machine or equipment have been accomplished:  On or about March 1, 2023, at a workplace located at 1330 Lime Kiln Road, Green Bay, Wisconsin, in the Fabrication Department; an employee initiated a saw blade change on the SmartSaw without verifying all energy had been removed from the machine.
Recent events (3)
  • — F (S) $0
  • — C (S) $9822
  • — Z (S) $9822

1910.212 A02

Serious Gravity 5 5 instances 20 exposed
Issued
Jun 13, 2023
Penalty
Initial $9,822 · Current $15,625
29 CFR 1910.212(a)(2): General requirements for machine guards. Guards shall be affixed to the machine where possible and secured elsewhere if for any reason attachment to the machine is not possible. The guard shall be such that it does not offer an accident hazard in itself:  a) On or about January 6, 2023, at a workplace located at 1330 Lime Kiln Road, Green Bay, Wisconsin in the Lower Variety Level, adjacent to the Rendering Department; The expanded metal guarding covering the power transmission components on the waste conveyor was damaged with a sharp metal piece protruding from the enclosure and it was not affixed to the frame.
Recent events (3)
  • — F (S) $15625
  • — C (S) $9822
  • — Z (S) $9822

1910.28 B03 IV

Serious Gravity 5 1 instance 5 exposed
Issued
Jun 13, 2023
Penalty
Initial $61,391 · Current $15,625 Reduced
29 CFR  1910.28(b)(3)(iv):(iv) Each employee is protected from falling into a ladderway floor hole or ladderway platform hole by a guardrail system and toeboards erected on all exposed sides, except at the entrance to the hole, where a self-closing gate or an offset must be used:  At a workplace located at 300 Lime Kiln Road, Green Bay, WI in the Harvest Department; Employees were exposed to fall hazards of approximately 11 feet to the floor while using a ladderway hole as a point of access to the Beef Wash Cabinet, which was not equipped with an offset or a self-closing gate.   JBS Green Bay, Inc. was previously cited for a violation of an equivalent Occupational Safety and Health Standard 1910.28(b)(3)(iv), which was contained in OSHA inspection number 1304856, citation number 1, item number 5 and was affirmed as a final order on October 3, 2019, with respect to a workplace located at 1330 Lime Kiln Road, Green Bay, Wisconsin.
Recent events (3)
  • — F (S) $15625
  • — C (R) $61391
  • — Z (R) $61391

1910.212 A01

Serious Gravity 5 2 instances 15 exposed
Issued
Jun 13, 2023
Penalty
Initial $61,391 · Current $15,625 Reduced
29 CFR 1910.212(a)(1): Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices, electronic safety devices, etc.:  a) On or about January 6, 2023, at a workplace located at 1330 Lime Kiln Road, Green Bay, Wisconsin in the Lower Kill/Variety Area; Employees working and walking in close proximity to the waste auger conveyor, were exposed to ingoing nip point and/or rotating parts hazards from the unguarded powered auger.   b) On or about December 23, 2022, at a workplace located at 1330 Lime Kiln Road, Green Bay, Wisconsin in the Harvest Department; Employees working at the second transfer were exposed to pinch point hazards from the automatic upward movement of the chain and shackle initially wrapped around the cow's leg.   JBS Green Bay, Inc. was previously cited for a violation of an equivalent Occupational Safety and Health Standard 1910.212(a)(1), which was contained in OSHA inspection number 1304856, citation number 1, item number 5 and was affirmed as a final order on October 3, 2019, with respect to a workplace located at 1330 Lime Kiln Road, Green Bay, Wisconsin.
Recent events (3)
  • — F (S) $15625
  • — C (R) $61391
  • — Z (R) $61391

1910.212 A03 II

Deleted Repeat Gravity 5 5 instances 8 exposed
Issued
Jun 13, 2023
Abate by
Jul 6, 2023
Penalty
Initial $61,391 · Current $0 Reduced
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle:   a) On or about March 1, 2023, at a workplace located at 1330 Lime Kiln Road, Green Bay, Wisconsin in the Fabrication Department; On the BT-6 metal band saws, the unused portion of the rotating band saw blade was not reduced to within 1/4 inches of the piece being cut on the saw.   b) On or about March 1, 2023, at a workplace located at 1330 Lime Kiln Road, Green Bay, Wisconsin in the Fabrication Department; On the BT-5 metal band saws, the unused portion of the rotating band saw blade was not reduced to within 1/4 inches of the piece being cut on the saw.   c) On or about March 1, 2023, at a workplace located at 1330 Lime Kiln Road, Green Bay, Wisconsin in the Fabrication Department; On the BT-3 metal band saws, the unused portion of the rotating band saw blade was not reduced to within 1/4 inches of the piece being cut on the saw.  JBS Green Bay, Inc. was previously cited under the name JBS Foods, Inc. dba Swift Beef Company for a Serious violation of this Occupational Safety and Health Standard, 29 CFR 1910.212(a)(3)(ii), which was affirmed as a final order on January 29, 2020, which was contained in OSHA Inspection number 1364425, citation number 2, item number 1, and was affirmed as a final order on with respect to a workplace located at 5950 Trails End Road, Cactus, Texas 79013.
Recent events (3)
  • — F (R) $0
  • — C (R) $61391
  • — Z (R) $61391

1910.305 B02 I

Deleted Repeat 2 instances 10 exposed
Issued
Jun 13, 2023
Penalty
Initial $491 · Current $0 Reduced
29 CFR 1910.305(b)(2)(i): All pull boxes, junction boxes, and fittings shall be provided with covers identified for the purpose. If metal covers are used, they shall be grounded. In completed installations, each outlet box shall have a cover, faceplate, or fixture canopy. Covers of outlet boxes having holes through which flexible cord pendants pass shall be provided with bushings designed for the purpose or shall have smooth, well-rounded surfaces on which the cords may bear:  a) On or about March 1, 2023, at a workplace located at 1330 Lime Kiln Road, Green Bay, Wisconsin in the Fabrication Department; An electrical outlet box cover on the block wall near the end of the BT-6 table did not have a cover.   b) On or about March 8, 2023, at a workplace located at 1330 Lime Kiln Road, Green Bay, Wisconsin in the Rendering Department; The junction box affixed to surface above the bone bin discharge auger did not have a cover.  JBS Green Bay, Inc. was previously cited for a violation of an equivalent Occupational Safety and Health Standard 1910.305(b)(2)(i), which was contained in OSHA inspection number 1304856, citation number 3, item number 1 and was affirmed as a final order on October 3, 2019, with respect to a workplace located at 1330 Lime Kiln Road, Green Bay, Wisconsin.
Recent events (3)
  • — F (R) $0
  • — C (R) $491
  • — Z (R) $491

1910.1200 F06

Other-than-serious 1 instance 3 exposed
Issued
Jun 13, 2023
Penalty
Initial $0 · Current $4,822
29 CFR 1910.1200(f)(6): Workplace labeling. Except as provided in paragraphs (f)(7) and (f)(8) of this section, the employer shall ensure that each container of hazardous chemicals in the workplace is labeled, tagged or marked with either:  On or about January 6, 2023, at a workplace located at 1330 Lime Kiln Road, Green Bay, Wisconsin in the Trolley Washing Room; The spray pump container, containing Neutraleze LQ, was not labeled to identify the container contents. The label had fallen off due to not being suitable for wet environments.
Recent events (3)
  • — F (O) $4822
  • — C (O) $0
  • — Z (O) $0

1910.1200 G08

Other-than-serious 1 instance 3 exposed
Issued
Jun 13, 2023
Abate by
Jun 28, 2023
Penalty
Initial $1,378 · Current $6,378
29 CFR 1910.1200(g)(8): The employer shall maintain in the workplace copies of the required safety data sheets for each hazardous chemical and shall ensure that they are readily accessible during each work shift to employees when they are in their work area(s). (Electronic access and other alternatives to maintaining paper copies of the safety data sheets are permitted as long as no barriers to immediate employee access in each workplace are created by such options.)  On or about May 10, 2023, at a workplace located at 1330 Lime Kiln Road, Green Bay, Wisconsin in the Trolley Wash Area; Safety Data Sheet(s) for acids sprayed and/or used to drip trolleys were not readily accessible to employees.
Recent events (3)
  • — F (O) $6378
  • — C (O) $1378
  • — Z (O) $1378

View JBS Green BAY, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346422967.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.