Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: TOMBALL CONTROLS

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of TOMBALL CONTROLS in 4545 FARM ROAD 775, SEGUIN, TX 78155 (NAICS 332813). OSHA activity number 346431943.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Tomball Controls — free Get an email when a new federal OSHA severe-injury report for Tomball Controls is published. One employer, no account, unsubscribe in one click.
Establishment
TOMBALL CONTROLS
Site address
4545 FARM ROAD 775
City
SEGUIN
State
TX
ZIP
78155
Mailing
4545 FARM ROAD 775, SEGUIN, TX 78155
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332813
Employees
28
Ownership type
A

4 citations on file for this inspection.

1910.134 E01

Serious Gravity 1 1 instance 2 exposed
Issued
Jun 12, 2023
Abate by
Jul 10, 2023
Penalty
Initial $4,687 · Current $2,812 Reduced
29 CFR  1910.134(e)(1):The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace.  On or about January 13, 2023, and at times prior thereto, the employer had not conducted medical evaluations of personnel performing sandblasting operations required to wear respirators, exposing these employees to the hazard of silica and silicosis.
Recent events (2)
  • — I (S) $2812.2
  • — Z (S) $4687

1910.134 F01

Serious Gravity 1 1 instance 2 exposed
Issued
Jun 12, 2023
Abate by
Jul 10, 2023
Penalty
Initial $4,687 · Current $2,812 Reduced
29 CFR  1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT).  On or about January 13, 2023, and at times prior thereto, the employer had not conducted fit testing of personnel performing sandblasting operations required to wear respirators, exposing these employees to the hazard of silica and silicosis.
Recent events (2)
  • — I (S) $2812.2
  • — Z (S) $4687

1910.1053 J03 I

Serious Gravity 1 1 instance 2 exposed
Issued
Jun 12, 2023
Abate by
Jul 10, 2023
Penalty
Initial $4,687 · Current $2,812 Reduced
29 CFR  1910.1053(j)(3)(i): Employee information and training. The employer did not ensure that each employee covered by this section can demonstrate knowledge and understanding of at least the following: a) The health hazards associated with exposure to respirable crystalline silica; b) Specific tasks in the workplace that could result in exposure to respirable crystalline silica; c) Specific measures the employer has implemented to protect employees from exposure to respirable crystalline silica, including engineering controls, work practices, and respirators to be used; d) The contents of this section; and e) The purpose and a description of the medical surveillance program required by paragraph (i) of this section.  On or about January 13, 2023, and at times prior thereto, the employer did not provide training and information on the hazards and controls associated with crystalline silica while conducting sand blasting operations, exposing these employees to the hazard of silica and silicosis.
Recent events (2)
  • — I (S) $2812.2
  • — Z (S) $4687

1910.132 D02

Other-than-serious 1 instance 2 exposed
Issued
Jun 12, 2023
Abate by
Jul 10, 2023
Penalty
Initial $0 · Current $0
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment had been performed through a written certification that identified the workplace evaluated;  the person certifying that the evaluation has been performed;  the date(s) of the hazard assessment;  and which identifies the document as a certification of hazard assessment:  On or about January 13, 2023, and at times prior thereto, the employer did not verify that a workplace hazard assessment had been performed through a written certification for the sand blasting operations, requiring personal protective equipment (PPE).
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Tomball Controls's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346431943.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.