LEWISVILLE, TX —
OSHA Inspection: HARRIS MANUFACTURING SOLUTIONS
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HARRIS MANUFACTURING SOLUTIONS in 120 VALLEY RIDGE BLVD, LEWISVILLE, TX 75057 (NAICS 336413). OSHA activity number 346447204.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HARRIS MANUFACTURING SOLUTIONS
- Site address
- 120 VALLEY RIDGE BLVD
- City
- LEWISVILLE
- State
- TX
- ZIP
- 75057
- Mailing
- 120 VALLEY RIDGE BLVD, LEWISVILLE, TX 75057
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336413
- Employees
- 51
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.37 B04
- Issued
- Feb 14, 2023
- Abate by
- Mar 15, 2023
- Penalty
- Initial $4,687 · Current $2,812 Reduced
General-duty citation text
29 CFR 1910.37(b)(4):Signs were not posted along the exit access indicating the direction of travel to the nearest exit and exit discharge when the direction of travel to the exit or exit discharge was not immediately apparent. On or about January 19, 2023 and times prior thereto and after, emergency exit signs indicating the direction of travel to the nearest designated exit were not immediately apparent from within the following normally employee occupied areas of the facility: a) Lathe Department (Southeast Portion of Facility); b) De-Burr Department (Southwest Portion of Facility)
Recent events (2)
- — I (S) $2812.2
- — Z (S) $4687
1910.212 A03 II
- Issued
- Feb 14, 2023
- Abate by
- Mar 15, 2023
- Penalty
- Initial $10,938 · Current $6,563 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii):Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s). On or about January 19, 2023 and times prior thereto and after, the point of operation on the following pieces of machinery were not guarded to prevent employees from having their body parts exposed to the zone of danger during operation: a) Roll-in-Saw Vertical bandsaw(s) in the De-Burr Area; b) Kalamazoo Horizontal Saw in the De-Burr Area
Recent events (2)
- — I (S) $6562.8
- — Z (S) $10938
1910.215 A04
- Issued
- Feb 14, 2023
- Abate by
- Mar 15, 2023
- Penalty
- Initial $4,687 · Current $2,812 Reduced
General-duty citation text
29 CFR 1910.215(a)(4):Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch. On or about January 19, 2023 and times prior thereto and after, work rests on abrasive wheel grinders were either not present or not adjusted to less than 1/8 of an inch to the wheel at the following locations: a) Missing work rest guard in the De-Burr Area; b) Work Rest not adjusted in the Lathe Area
Recent events (2)
- — I (S) $2812.2
- — Z (S) $4687
1910.242 B
- Issued
- Feb 14, 2023
- Abate by
- Mar 15, 2023
- Penalty
- Initial $4,687 · Current $2,812 Reduced
General-duty citation text
29 CFR 1910.242(b):Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i. On or about January 19, 2023 and times prior thereto and after, compressed air that was used for cleaning purposes on the following machines was not reduced to less than 30 psi: a) Mazak #8 b) HAAS #10 c) Machine #12 d) Machine #14 e) Kitamura #16 f) Kitamura #17 g) Mazak #18 h) HAAS #21 i) HAAS#22 j) HAAS #23
Recent events (2)
- — I (S) $2812.2
- — Z (S) $4687
More inspections in this industry (NAICS 336413)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346447204.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.