OSHA Inspection: NAF MORALE, WELFARE, AND RECREATION

Issued

Feb 21, 2023

Abate by

Mar 3, 2023

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  Employees required to use a half-face respirator when diluting chemicals into a sprayer were not medically evaluated prior to respirator use.  Employees were exposed to respiratory hazards.

Issued

Feb 21, 2023

Abate by

Mar 3, 2023

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator:  Employees required to use a half-face respirator when diluting chemicals into a sprayer without being fit tested prior to respirator use.  Employees were exposed to respiratory hazards.

Issued

Feb 21, 2023

Abate by

Mar 3, 2023

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:  Cart Barn/New and Used Battery Holding Area:  Employees were not provided with facilities for quick drenching or flushing of the eyes while working with golf cart batteries containing corrosive acid. Employees were exposed to chemical hazards.

Issued

Feb 21, 2023

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  Maintenance Shop: The floor mounted Wilton drill press did not have a chuck guard. Employees were exposed to rotating part hazards.

Issued

Feb 21, 2023

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:  Maintenance Shop: The work rest for the 8" bench grinder was half an inch away from the grinding wheel. Employees were exposed to caught-in hazards.

Issued

Feb 21, 2023

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:  Cart Barn/Employee Lounge Area Under Safety Board: A microwave plugged into a relocatable power tap that was connected in series (daisy chained) with another relocatable power tap. Employees were exposed to fire and electrical hazards.