HILLSIDE, NJ —
OSHA Inspection: AAK FOODSERVICE, HILLSIDE, NJ
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of AAK FOODSERVICE, HILLSIDE, NJ in 465 HILLSIDE AVE, HILLSIDE, NJ 07205 (NAICS 722310). OSHA activity number 346464092.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AAK FOODSERVICE, HILLSIDE, NJ
- Site address
- 465 HILLSIDE AVE
- City
- HILLSIDE
- State
- NJ
- ZIP
- 07205
- Mailing
- 465 HILLSIDE AVE, HILLSIDE, NJ 07205
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 722310
- Employees
- 20
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- May 19, 2023
- Abate by
- Jun 8, 2023
- Penalty
- Initial $5,358 · Current $3,215 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of hazardous energy when employees were engaged in activities such as sanitizing Filler machines. a) AAK Foodservice, Hillside, NJ/ Throughout Facility- The employer did not ensure that all employees utilized lockout/tagout procedures when sanitizing Filler Machines. An employee sanitizing the REB Filler machine placed his hand near a pneumatic valve, while the machine was powered to drain. The employee did not utilize energy control procedures. Observed on or about on 01/21/2023.
Recent events (2)
- — I (S) $3214.8
- — Z (S) $5358
1910.147 C07 I
- Issued
- May 19, 2023
- Abate by
- Jun 8, 2023
- Penalty
- Initial $5,358 · Current $3,215 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. a) AAK Foodservice, Hillside, NJ/ Production Floor- The employer did not adequately train Sanitation employees to ensure that the purpose and functions of the energy control program were understood. Observed on or about on 01/21/2023.
Recent events (2)
- — I (S) $3214.8
- — Z (S) $5358
1910.212 A01
- Issued
- May 19, 2023
- Abate by
- Jun 8, 2023
- Penalty
- Initial $5,358 · Current $3,215 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by moving parts of conveyors and rotating parts: a) AAK Foodservice, Hillside, NJ/ Production Floor- The guard used for covering rotating parts was missing from the Filler machine exposing employees to amputation hazards.The employer did not ensure that guarding was provided to protect employees from rotating parts of the REB Filler FILL12 ID#LP1381 machine. Observed on or about on 01/21/2023.
Recent events (2)
- — I (S) $3214.8
- — Z (S) $5358
1910.212 A03 II
- Issued
- May 19, 2023
- Abate by
- Jun 8, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s). a) AAK Foodservice, Hillside, NJ/ Production Floor- Sanitation employees working on the production floor were exposed to amputation hazards created by unguarded points of operation on the Filler machine. Observed on or about on 01/21/2023.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 722310)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346464092.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.