Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: COMPLEMAR PARTNERS INCORPORATED

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of COMPLEMAR PARTNERS INCORPORATED in 1011 AIP DR #4, MIDDLETOWN, PA 17057 (NAICS 493110). OSHA activity number 346469133.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Complemar Partners Incorporated — free Get an email when a new federal OSHA severe-injury report for Complemar Partners Incorporated is published. One employer, no account, unsubscribe in one click.
Site address
1011 AIP DR #4
City
MIDDLETOWN
State
PA
ZIP
17057
Mailing
1011 AIP DRIVE #4, MIDDLETOWN, PA 17057
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
493110
Employees
34
Ownership type
A

9 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 1 instance 34 exposed
Issued
Jul 27, 2023
Abate by
Aug 22, 2023
Penalty
Initial $6,250 · Current $9,000
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck by hazards:  a.)  Warehouse - On or about January 31, 2023, employees are exposed to struck-by and crushing hazards where industrial storage racks were visibly damaged with bent and twisted beams and columns, missing beam clips, and damaged or missing anchor bolts in locations included, but are not limited to:  a.  02-192-305-1-1     b.   02-192-333-2-2  c. 03-181-349-4-1  d. 02-192-349-1-1     e. 02-192-377-1-1    f.  02-188-450-1-1  g. 02-161-345-1-1     h. 02-172-301-1-1     i.  02-145-245-1-1  j.  02-612-608-1-1     k. 02-219-458-1-1    l.  02-82-265-1-1   m. 03-118-433-4-2   n. Pick Bridge Location    o. 02-192-365-1-1  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $9000
  • — Z (S) $6250

1910.37 A03

Deleted Serious Gravity 1 1 instance 4 exposed
Issued
Jul 27, 2023
Penalty
Initial $4,687 · Current $0 Reduced
29 CFR  1910.37(a)(3): Exit route(s) were not kept free and unobstructed:  a) Rear Fire Exit doors - The employer did not ensure that exit doors were kept free and unobstructed, on or about January 31, 2023.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $0
  • — Z (S) $4687

1910.30 C03

Serious Gravity 5 1 instance 4 exposed
Issued
Jul 27, 2023
Abate by
Aug 22, 2023
Penalty
Initial $7,813 · Current $9,000
29 CFR 1910.30(c)(3): The employer did not retrain an employee when inadequacies in an affected employee's knowledge or use of fall protection systems or equipment indicated that the employee no longer had the requisite understanding or skill necessary to use equipment or perform the job safely.  a) Plant Wide - The employer did not ensure that personal fall protections systems and components were removed from service when impact indicators were present, on or about January 31, 2023.   Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $9000
  • — Z (S) $7813

1910.140 C18

Deleted Serious Gravity 5 1 instance 3 exposed
Issued
Jul 27, 2023
Abate by
Aug 22, 2023
Penalty
Initial $0 · Current $0
29 CFR 1910.140(c)(18):  The employer did not ensure that personal fall protection systems are inspected before initial use during each workshift for mildew, wear, damage, and other deterioration, and defective components are removed from service.  a) Plant Wide - The employer did not ensure that body harness were inspected, and when visible defects found, removed from service, on or about January 31, 2023.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.178 L01 I

Deleted Serious Gravity 5 1 instance 4 exposed
Issued
Jul 27, 2023
Abate by
Aug 22, 2023
Penalty
Initial $6,250 · Current $0 Reduced
29 CFR  1910.178(l)(1)(i):The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  a) Plant-Wide: Employees operated powered industrial trucks to transport products throughout the plant, and did not complete training, prior to operating powered industrial trucks. The employer did not ensure that employees successfully completed training, prior to being allowed to operate powered industrial trucks and equipment, on or about January 31, 2023.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $0
  • — Z (S) $6250

1910.22 A03

Deleted Other-than-serious 1 instance 4 exposed
Issued
Jul 27, 2023
Abate by
Aug 22, 2023
Penalty
Initial $0 · Current $0
29 CFR 1910.22(a)(3): The employer did not ensure that walking-working surfaces are maintained free of hazards such as sharp or protruding objects, loose boards, corrosion, leaks, spills, snow, and ice.  a) Plant Wide - Employees are exposed to tripping hazards from broken wooden pallets, on or about January 31, 2023.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and state employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.176 A

Deleted Other-than-serious 1 instance 4 exposed
Issued
Jul 27, 2023
Abate by
Aug 22, 2023
Penalty
Initial $0 · Current $0
29 CFR 1910.176(a):  Aisle(s) and passageway(s) were not kept clear and in good repair with no obstruction across or in aisles that could create a hazard.  a) Plant-Wide  - Employees are exposed to struck-by hazards from tight passageways from gaylords stored  in the aisleway, at receiving side of warehouse, on or about January 31, 2023.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and state employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.157 C01

Other-than-serious 1 instance 34 exposed
Issued
Jul 27, 2023
Abate by
Aug 22, 2023
Penalty
Initial $0 · Current $0
29 CFR 1910.157(c)(1):  Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries:  a) Rear Double Doors/Overhead Door - The employer did not ensure that portable fire extinguisher were readily accessible, on or about January 31, 2023.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.303 G01

Deleted Other-than-serious 1 instance 1 exposed
Issued
Jul 27, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.303(g)(1):Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment:  a) Packaging / Tape Area: The employer did not ensure that an electrical control panel was provided with sufficient working space, on or about January 31, 2023.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346469133.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.