HOLBROOK, MA —
OSHA Inspection: SPECTOR METAL PRODUCTS CO, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of SPECTOR METAL PRODUCTS CO, INC. in 608 SOUTH STREET, HOLBROOK, MA 02343 (NAICS 331110). OSHA activity number 346470917.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SPECTOR METAL PRODUCTS CO, INC.
- Site address
- 608 SOUTH STREET
- City
- HOLBROOK
- State
- MA
- ZIP
- 02343
- Mailing
- 608 SOUTH STREET, HOLBROOK, MA 02343
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331110
- Employees
- 7
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.212 A01
- Issued
- Jun 15, 2023
- Abate by
- Aug 7, 2023
- Penalty
- Initial $3,349 · Current $2,344 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Location: Fabrication Shop On or about January 31, 2023, employees were exposed to un-guarded rotating parts on the following machines; a) Employees were exposed to the unused portion of blade on the Hydmech horizontal band saw, that was not guarded. b) Employees were exposed to the rotating vertical shafts on the Cleereman drill press, that was not guarded.
Recent events (2)
- — I (S) $2344.3
- — Z (S) $3349
1910.215 A04
- Issued
- Jun 15, 2023
- Abate by
- Jul 24, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4):Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:(a) Location: Fabrication On or about April 7, 2023, the Ryobi bench grinder was used with the work rest 1/2 inch from the left abrasive wheel and 3/4 inch from the right from the right abrasive wheel.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 B09
- Issued
- Jun 15, 2023
- Abate by
- Jul 24, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: Location: Fabrication On or about April 7, 2023, the Ryobi bench grinder was used with the tongue guard 3/4 inch from the left abrasive wheel and 1-3/4 inch from the right abrasive wheel.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 B01 II
- Issued
- Jun 15, 2023
- Abate by
- Jul 24, 2023
- Penalty
- Initial $2,009 · Current $1,406 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: a. Location: Fabrication, outside office door: On or about January 31, 2023, an electrical cabinet had an unused breaker opening that was not covered. b. Location: Fabrication, behind punch press: On or about January 31, 2023, an electrical cabinet had an unused breaker opening that was not covered.
Recent events (2)
- — I (S) $1406.3
- — Z (S) $2009
1910.178 L06
- Issued
- Jun 15, 2023
- Abate by
- Jul 24, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): Location: Fabrication On or about April 7. 2023, the employer did not certify in writing that forklift training and evaluation for employees operating the Clark fork lift truck, had been provided.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.303 G01 II
- Issued
- Jun 15, 2023
- Abate by
- Jul 24, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1)(ii):The required working space about electric equipment rated 600 volts, nominal, or less to ground, was used for storage: Location: Fabrication, behind punch machine On or about January 31, 2023, materials and equipment were stored in front of an electrical circuit breaker box.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Spector Metal Products CO, INC.
View Spector Metal Products CO, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 331110)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346470917.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.