OSHA Inspection: FLASH4.COM, LLC

Issued

2023-05-22 00:00:00

Abate by

2023-06-13 00:00:00

Penalty

Initial $6875.00 · Current $4813.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(5)(ii)(D): Lockout devices and tagout devices did not indicate the identity of the employee applying the device(s):  (a) Throughout the facility; Lockout devices used to control energy isolation sources during service and maintenance activities did not include the identity of the employees who affixed the devices.

Issued

2023-05-22 00:00:00

Abate by

2023-06-13 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s):  (a) Black Label Line, CEI B; An employee performed service and maintenance tasks not limited to, die replacement and set up on the CEI brand Label Die Cutting Machine, model CEI13, serial no. 355, without isolating equipment energy source(s).

Issued

2023-05-22 00:00:00

Abate by

2023-06-13 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees:  (a) Black Label Line, CEI B; An employee performed service and maintenance tasks not limited to, die replacement and set up on the CEI brand Label Die Cutting Machine, model CEI13, serial no. 355, without affixing lockout or tagout device(s) to equipment energy source(s).

Issued

2023-05-22 00:00:00

Abate by

2023-06-21 00:00:00

Penalty

Initial $10313.00 · Current $7219.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  (a)	Black Label Line, Rotoflex A; Machine guarding was not provided at all necessary locations to protect employees from ingoing nip point and/or shear point hazards on the Mark Andy brand Rotoflex Die Cutter and Laminator, model DLI-330, serial no. 9618756.  (b)	Black Label Line, Mark 7; Machine guarding was not provided at all necessary locations to protect employees from ingoing nip point and/or shear points hazards on the Mark Andy brand Rotary Printer and Die Cutter, model 830927Y-727C, serial no. 7642.  (c)	Black Label Line, CEI B; Machine guarding was not provided at all necessary locations to protect employees from ingoing nip point and/or shear points hazards on the CEI brand Label Die Cutting Machine, model CEI13, serial no. 355.  (d)	Color Printing Line, Mark 13 A; Machine guarding was not provided at all necessary locations to protect employees from ingoing nip point and/or shear points hazards on the Mark Andy brand Printing Press, model 2200-13F, serial no. 1203382-1.  (e)	Color Printing Line, Mark 17; Machine guarding was not provided at all necessary locations to protect employees from ingoing nip point and/or shear points hazards on the Mark Andy brand Printing Press, model 2200-17H, serial no. 1421365.  (f)	Color Printing Line, Mark 13 B; Machine guarding was not provided at all necessary locations to protect employees from ingoing nip point and/or shear points hazards on the Mark Andy brand Printing Press, model 2200-13F, serial no. 1247356.

Issued

2023-05-22 00:00:00

Abate by

2023-06-13 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.219(f)(3): Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed:  (a)Black Label Line, Mark 7; A powered chain drive on the Mark Andy brand Rotary Printer and Die Cutter, model 830927Y-727C, serial no. 7642, was located approximately 3-feet above the floor and was not enclosed.

Issued

2023-05-22 00:00:00

Abate by

2023-06-13 00:00:00

Penalty

Initial $5156.00 · Current $3609.00 Reduced

General-duty citation text

29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft:  (a) Colored Printing Line, Mark 17; A powered shaft end for the main webbing spool located on the Mark Andy brand Printing Press, model 2200-17H, serial no. 1421365, projected more than one half of the shaft's diameter.