Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DENNIS TAYLOR

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of DENNIS TAYLOR in 26110 COUNTY ROAD 13 BLDG. A JUBILEE FAMILY DENTISTRY, DAPHNE, AL 36526 (NAICS 238130). OSHA activity number 346486087.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Dennis Taylor — free Get an email when a new federal OSHA severe-injury report for Dennis Taylor is published. One employer, no account, unsubscribe in one click.
Establishment
DENNIS TAYLOR
Site address
26110 COUNTY ROAD 13 BLDG. A JUBILEE FAMILY DENTISTRY
City
DAPHNE
State
AL
ZIP
36526
Mailing
10744 CLAUDES PLACE, FAIRHOPE, AL 36532
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

4 citations on file for this inspection.

1926.451 B02

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 24, 2023
Abate by
Mar 8, 2023
Penalty
Initial $2,679 · Current $2,679
29 CFR  1926.451(b)(2): Except as provided in paragraphs (b)(2)(i) and (b)(2)(ii) of this section, each scaffold platform and/or walkway was not at least 18 inches (46 cm) wide:  a)  At 26110 County Road 13 Building A, Jubilee Family Dentistry, Daphne, Alabama:  On February 7, 2023; the employer allowed his employee to work from a scaffold  with a work platform that measured 12 inches wide and not 18 inches wide as required by the standard up to 14 feet 6 inches to the ground below.
Recent events (1)
  • — Z (S) $2679

1926.451 F15

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 24, 2023
Abate by
Mar 8, 2023
Penalty
Initial $0 · Current $0
29 CFR  1926.451(f)(15): Ladders were used on scaffolds to increase the working level height of employees: without satisfying the criteria of subparagraphs (i) - (iv) of this paragraph:  a)  At 26110 County Road 13 Building A, Jubilee Family Dentistry, Daphne, Alabama:  On February 7, 2023; the employer allowed his employee to work from a 8 foot a-frame ladder set on the scaffold platform to perform framing activities exposing his employee to a fall hazard of up to 14 feet 6 inches to the ground below.
Recent events (1)
  • — Z (S) $0

1926.451 G01

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 24, 2023
Abate by
Mar 8, 2023
Penalty
Initial $0 · Current $0
29 CFR  1926.451(g)(1):Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section:  a)  At 26110 County Road 13 Building A, Jubilee Family Dentistry, Daphne, Alabama:  On February 7, 2023; the employer allowed his employee to work from a scaffold  without fall protection exposing his employee to a fall hazard of up to 14 feet 6 inches to the ground below.
Recent events (1)
  • — Z (S) $0

1926.454 A

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 24, 2023
Abate by
Mar 8, 2023
Penalty
Initial $0 · Current $0
29 CFR  1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards.   a)  At 26110 County Road 13 Building A, Jubilee Family Dentistry, Daphne, Alabama:  On February 7, 2023; the employer allowed his employee to work from a scaffold  without first ensuring his employees were trained on the hazards associated with scaffolds to include but not limited to the width of scaffold platforms and the requirement for fall protection exposing his employees to a fall hazard of up to 14 feet 6 inches to the ground below.
Recent events (1)
  • — Z (S) $0

View Dennis Taylor's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346486087.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.