GREAT NECK, NY —
OSHA Inspection: GGA CONSTRUCTION CORP.
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of GGA CONSTRUCTION CORP. in 148 MIDDLE NECK ROAD, GREAT NECK, NY 11020 (NAICS 236118). OSHA activity number 346488299.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GGA CONSTRUCTION CORP.
- Site address
- 148 MIDDLE NECK ROAD
- City
- GREAT NECK
- State
- NY
- ZIP
- 11020
- Mailing
- 149-16 19TH AVE., FLUSHING, NY 11357
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236118
- Employees
- 10
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.501 B04 I
- Issued
- Feb 23, 2023
- Penalty
- Initial $3,349 · Current $2,500 Reduced
General-duty citation text
29 CFR 1926.501(b)(4)(i): Each employee on walking/working surfaces was not protected from falling through holes (including skylights), more than six feet (1.8 m) above lower levels, by personal fall arrest systems, covers, or guardrail systems erected around such holes. a) Worksite- Employee was exposed to falling through a floor hole approximately 14 ft. while preparing to frame interior walls; on or about 8/29/22. Note: Because abatement of this violation is already documented in the case file, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19.
Recent events (2)
- — I (S) $2500
- — Z (S) $3349
1926.502 I03
- Issued
- Feb 23, 2023
- Penalty
- Initial $3,349 · Current $2,500 Reduced
General-duty citation text
29 CFR 1926.502(i)(3): All covers were not secured when installed so as to prevent accidental displacement by the wind, equipment, or employees: a) Worksite- A 4 by 4-foot section of 3/4 inch plywood covering a 2 by 3-foot floor hole was not secured. On or about 8/29/2022. Note: Because abatement of this violation is already documented in the case file, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19.
Recent events (2)
- — I (S) $2500
- — Z (S) $3349
1926.502 I04
- Issued
- Feb 23, 2023
- Penalty
- Initial $3,349 · Current $2,500 Reduced
General-duty citation text
29 CFR 1926.502(i)(4): All covers were not color coded or marked with the word "HOLE" or "COVER" to provide warning of the hazard: a) Worksite- A 4 by 4-foot section of 3/4 inch plywood covering a 2 by 3-foot floor hole was not identified or labeled as a floor hole cover. On or about 8/29/2022. Note: Because abatement of this violation is already documented in the case file, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19.
Recent events (2)
- — I (S) $2500
- — Z (S) $3349
More inspections in this industry (NAICS 236118)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346488299.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.