Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MARTIN WELDING LLC

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of MARTIN WELDING LLC in 1472 WEST MAIN STREET, NEW LEBANON, OH 45345 (NAICS 811310). OSHA activity number 346499270.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Martin Welding LLC — free Get an email when a new federal OSHA severe-injury report for Martin Welding LLC is published. One employer, no account, unsubscribe in one click.
Establishment
MARTIN WELDING LLC
Site address
1472 WEST MAIN STREET
City
NEW LEBANON
State
OH
ZIP
45345
Mailing
1472 WEST MAIN STREET, NEW LEBANON, OH 45345
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811310
Employees
26
Ownership type
A

4 citations on file for this inspection.

1910.253 B02 II

Serious Gravity 5 2 instances 26 exposed
Issued
May 4, 2023
Penalty
Initial $7,813 · Current $3,000 Reduced
29 CFR  1910.253(b)(2)(ii): Inside of buildings, cylinders shall be stored in a well-protected, well-ventilated, dry location, at least 20 (6.1 m) feet from highly combustible materials such as oil or excelsior. Cylinders should be stored in definitely assigned places away from elevators, stairs, or gangways. Assigned storage spaces shall be located where cylinders will not be knocked over or damaged by passing or falling objects, or subject to tampering by unauthorized persons. Cylinders shall not be kept in unventilated enclosures such as lockers and cupboards.   a.) On or about February 10, 2023, the employer did not ensure that the Argon cylinder secured from being struck by or knocked over while located next to the door leading into the breakroom.  b). On or about February 10, 2023, the employer did not ensure that the Argon cylinder was secured from being knocked over by employees working at one of the TIG welding stations near the breakroom door.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $7813

1910.1200 E01

Serious Gravity 1 1 instance 26 exposed
Issued
May 4, 2023
Abate by
May 24, 2023
Penalty
Initial $4,687 · Current $0 Reduced
29 CFR  1910.1200(e)(1): Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:  a.) On or about February 10, 2023, the employer did not have a written hazard communication program for employees exposed to hazardous chemicals such as, but not limited to Airgas carbon dioxide (compressed gas, asphyxiant) and Airgas argon (compressed gas, asphyxiant).
Recent events (2)
  • — I (S) $0
  • — Z (S) $4687

1910.1200 G01

Serious Gravity 1 1 instance 26 exposed
Issued
May 4, 2023
Penalty
Initial $4,687 · Current $0 Reduced
29 CFR  1910.1200(g)(1): Chemical manufacturers and importers shall obtain or develop a safety data sheet for each hazardous chemical they produce or import. Employers shall have a safety data sheet in the workplace for each hazardous chemical which they use.   a.) On or about February 10, 2023, the employer did not ensure safety data sheets for chemicals such as, but not limited to Airgas carbon dioxide  (compressed gas, asphyxiant) and Airgas argon (compressed gas, asphyxiant) were available in the workplace for employees welding or operating robot welders.
Recent events (2)
  • — I (S) $0
  • — Z (S) $4687

1910.132 D02

Other-than-serious 1 instance 26 exposed
Issued
May 4, 2023
Abate by
May 24, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.132(d)(2): The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.   a.) On or about February 10, 2023, the employer did not have a written certification of hazard assessment verifying that the required workplace hazard assessment had been performed.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Martin Welding LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346499270.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.