Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BLUE JEANS CARPENTERS INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of BLUE JEANS CARPENTERS INC. in 26840 W OLD KERRY GR, CHANNAHON, IL 60410 (NAICS 238130). OSHA activity number 346507205.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Blue Jeans Carpenters INC. — free Get an email when a new federal OSHA severe-injury report for Blue Jeans Carpenters INC. is published. One employer, no account, unsubscribe in one click.
Site address
26840 W OLD KERRY GR
City
CHANNAHON
State
IL
ZIP
60410
Mailing
1065 PHEASANT RUN LN, AURORA, IL 60504
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
4
Ownership type
A

4 citations on file for this inspection.

1910.178 L06

Serious Gravity 5 1 instance 1 exposed
Issued
May 5, 2023
Abate by
Jun 5, 2023
Penalty
Initial $3,349 · Current $2,060 Reduced
29 CFR  1910.178(l)(6):Certification. The employer shall certify that each operator has been trained and evaluated as required by this paragraph (l). The certification shall include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation.  On or about February 14, 2023 the employer failed to certify the operator of the JCB 524-50 Loadall was trained on the safe operation.  No certification was provided when requested.
Recent events (2)
  • — I (S) $2060
  • — Z (S) $3349

1926.451 C02 IV

Serious Gravity 10 1 instance 2 exposed
Issued
May 5, 2023
Abate by
Jun 5, 2023
Penalty
Initial $4,688 · Current $2,880 Reduced
29 CFR  1926.451(c)(2)(iv):Front-end loaders and similar pieces of equipment shall not be used to support scaffold platforms unless they have been specifically designed by the manufacturer for such use.  On or about February 14, 2023, employees working from a job made box were elevated 15 feet in the air by a JCB 524-50 Telescopic lift to perform residential framing and trim activities. The JCB 524050 Telescopic lift was not designed to be used as a personnel lift.  Abatement documentation is required for this item in accordance with 29 CFR 1903.19(d).
Recent events (2)
  • — I (S) $2880
  • — Z (S) $4688

1926.451 G01

Serious Gravity 10 1 instance 2 exposed
Issued
May 5, 2023
Abate by
Jun 5, 2023
Penalty
Initial $0 · Current $0
29 CFR  1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section:  On or about February 14, 2023 employees were not protected from falls while performing residential framing and trim work at a height in excess of 15 feet.  The employees were in a job built basket that was lifted by a JCB 524-50 Loadall telescoping lift.  The employees were not utilizing any fall protection devices.    Abatement documentation is required for this item in accordance with 29CFR 1903.19(d).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.454 A

Serious Gravity 5 1 instance 4 exposed
Issued
May 5, 2023
Penalty
Initial $3,349 · Current $2,060 Reduced
29 CFR  1926.454(a):The employer shall have each employee who performs work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards.   On or about February 14, 2023, the employer failed to train employees on how to recognize and minimized fall hazards associated with working on scaffolds.  Employees were performing trim work on a new residential home while standing on a job built basket that was being elevated by a JCB 524-50 Loadall.  The platform was in excess of 15 feet and employees were not utilizing a fall protection system.
Recent events (2)
  • — I (S) $2060
  • — Z (S) $3349

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346507205.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.