PHILLIPS, WI —
OSHA Inspection: BARRY-WEHMILLER PAPERSYSTEMS INTERNATIONAL, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of BARRY-WEHMILLER PAPERSYSTEMS INTERNATIONAL, INC. in 1300 N AIRPORT ROAD, PHILLIPS, WI 54555 (NAICS 333243). OSHA activity number 346509094.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BARRY-WEHMILLER PAPERSYSTEMS INTERNATIONAL, INC.
- Site address
- 1300 N AIRPORT ROAD
- City
- PHILLIPS
- State
- WI
- ZIP
- 54555
- Mailing
- 1300 N AIRPORT ROAD, PHILLIPS, WI 54555
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333243
- Employees
- 470
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jun 1, 2023
- Abate by
- Jun 15, 2023
- Penalty
- Initial $15,625 · Current $10,938 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) Gateway department; On or about January 23, 2023 and on dates prior, energy control procedure(s) were not developed, documented, and utilized before employees performed covered activities such as but not limited to blade changes, on the Marvel Model F2150PC3S Band Saw (Serial No. F2150-20621PC3S).
Recent events (2)
- — I (S) $10937.5
- — Z (S) $15625
1910.147 C07 I
- Issued
- Jun 1, 2023
- Abate by
- Jun 15, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: (a) Gateway department; On or about January 23, 2023 and on dates prior, the employer did not provide adequate training for employees on the recognition and control of hazardous energy source(s) before employees performed covered activities such as but not limited to blade changes, on the Marvel Model F2150PC3S Band Saw (Serial No. F2150-20621PC3S).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Jun 1, 2023
- Abate by
- Jun 15, 2023
- Penalty
- Initial $15,625 · Current $10,938 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Gateway department; On or about January 23, 2023 and on dates prior, employees were not protected from pinch point(s) created by moving material and a stationary t-slot cutout on the outfeed side of the Marvel Model F2150PC3S Band Saw (Serial No. F2150-20621PC3S) table.
Recent events (2)
- — I (S) $10937.5
- — Z (S) $15625
More inspections in this industry (NAICS 333243)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346509094.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.