OSHA Inspection: UNITED PAPER BOX CO

Issued

Apr 17, 2023

Abate by

May 11, 2023

Penalty

Initial $4,465 · Current $3,126 Reduced

General-duty citation text

29 CFR 1910.219(e)(1): The horizontal belt seven (7) feet or less from the floor level was not guarded:   a) 150 Middle Water St., Holyoke, MA: On February 16, 2023 and at times prior, a motor belt drive belt and pulley on the second-floor case maker area was missing a guard and  exposing employees to ingoing nip points and rotating part hazards.

Issued

Apr 17, 2023

Abate by

Jun 2, 2023

Penalty

Initial $4,465 · Current $3,126 Reduced

General-duty citation text

29 CFR  1910.147(c)(1):The employer did not establish a program consisting of an energy control procedures, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:  a) 150 Middle Water St., Holyoke, MA: On February 16, 2023 and at times prior, the employer had not established an energy control program to protect employees and outside contractors who performed maintenance and servicing activities on multi-energy source machines, including but not limited to the two company-made machines.    Abatement Notes:  Energy control procedures are required to be documented for all multiple-energy source machines including all CNC machines and mechanical power presses.    Energy control training is required to be documented and provided for all employees who are, or may be, in an area where energy control procedures may be utilized.  A periodic inspection shall include the following elements:  - Appointment of an authorized employee to inspect each local procedure for inaccuracies during an actual energy control task - A review by inspector with each authorized employee, of that employee's responsibilities under each energy control procedure they are authorized to use - Certification that the periodic inspections have been performed by identifying the machines or equipment on which the energy control procedures were being utilized, the dates of the inspections, the employees included in the inspections, and the persons performing the inspections  *Abatement notes are intended only to provide clarity regarding existing requirements under the law or agency policies. Abatement notes do not create (or diminish) legal obligations under the Occupational Safety and Health Act.