Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: GRACE CONSTRUCTION LLC

Unprogrammed Related inspection · Safety discipline

On , OSHA opened an unprogrammed Related safety inspection of GRACE CONSTRUCTION LLC in 1090 FORD WAY, BLACKFOOT, ID 83221 (NAICS 238130). OSHA activity number 346516719.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Grace Construction LLC — free Get an email when a new federal OSHA severe-injury report for Grace Construction LLC is published. One employer, no account, unsubscribe in one click.
Site address
1090 FORD WAY
City
BLACKFOOT
State
ID
ZIP
83221
Mailing
331 2ND ST W, HANSEN, ID 83334
Inspection type
Unprogrammed Related (G)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
10
Ownership type
A

4 citations on file for this inspection.

1926.102 A01

Serious Gravity 1 1 instance 1 exposed
Issued
Apr 4, 2023
Penalty
Initial $1,707 · Current $1,000 Reduced
29 CFR  1926.102(a)(1):The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.  a) On or about February 1, 2023 and at times prior to, framers operating pneumatic nail guns and/or the  Metabo HPT C 10RJ (S) 10" jobsite table saw, were not provided safety glasses to prevent eye abrasions or punctures from wood chips and/or dust.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $1707

1926.304 H01

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 4, 2023
Penalty
Initial $2,277 · Current $1,875 Reduced
29 CFR  1926.304(h)(1): Each circular crosscut table saw was not guarded by a hood which completely enclosed that portion of the saw blade above the table and that portion of the saw above the material being cut: Note:  See paragraph (i)(1) of this section for additional requirements for hand-fed crosscut table saws.  a) On or about February 1, 2023 and at times prior to, an employee was exposed to amputation hazards while utilizing the Metabo HPT C 10RJ (S) 10" jobsite table saw without a blade guard.
Recent events (2)
  • — I (S) $1875
  • — Z (S) $2277

1926.501 B01

Serious Gravity 5 1 instance 3 exposed
Issued
Apr 4, 2023
Abate by
Apr 10, 2023
Penalty
Initial $2,846 · Current $1,875 Reduced
29 CFR  1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.  a) On or about February 1, 2023 and at times prior to, framers were exposed to an approximate 18 foot fall hazard while sheathing a roof.
Recent events (2)
  • — I (S) $1875
  • — Z (S) $2846

1926.503 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Apr 4, 2023
Abate by
Apr 12, 2023
Penalty
Initial $0 · Current $0
29 CFR 1926.503(a)(1): A training program was not provided to each employee who might be exposed to fall hazards, to enable that employee to recognize the hazards of falling, and be trained in the procedures to be followed to minimize these hazards:  (a)  On or about February 1, 2023, and at times prior thereto, the employer did not ensure employees were educated with the appropriate knowledge and/or understanding of how to recognize a fall hazard and how to mitigate the potential hazard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346516719.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.