MASON, OH —
OSHA Inspection: A2Z ROOFING AND SIDING LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of A2Z ROOFING AND SIDING LLC in 1101 READING RD, MASON, OH 45040 (NAICS 238160). OSHA activity number 346543226.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- A2Z ROOFING AND SIDING LLC
- Site address
- 1101 READING RD
- City
- MASON
- State
- OH
- ZIP
- 45040
- Mailing
- 2420 PLEASANT AVE., HAMILTON, OH 45015
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 4
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.501 B10
- Issued
- May 26, 2023
- Penalty
- Initial $3,349 · Current $2,344 Reduced
General-duty citation text
29 CFR 1926.501(b)(10): "Roofing work on Low-slope roofs." Except as otherwise provided in paragraph (b) of this section, each employee engaged in roofing activities on low-slope roofs, with unprotected sides and edges 6 feet (1.8 m) or more above lower levels shall be protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system. Or, on roofs 50-feet (15.25 m) or less in width (see Appendix A to subpart M of this part), the use of a safety monitoring system alone [i.e. without the warning line system] is permitted. (a) On Feb. 28, 2023, the employer did not ensure employees were protected from falling in that employees performing roofing work on a commercial low-slope roof were exposed to fall hazards of approx. 16 feet above ground level while working at the unprotected roof edge without use of a conventional fall protection system or combination of warning line/fall protection system. (b) On Feb. 28, 2023, the employer did not ensure employees were protected from falling in that employees performing roofing work on a commercial low-slope roof of less than 50 feet in width were exposed to fall hazards of approx. 16 feet above ground level while working outside a warning line system and without use of a safety monitoring system.
Recent events (2)
- — I (S) $2344.3
- — Z (S) $3349
1926.502 F01 I
- Issued
- May 26, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.502(f)(1)(i): When mechanical equipment is not being used, the warning line shall be erected not less than 6 feet (1.8 m) from the roof edge. (a) On Feb. 28, 2023, the employer did not ensure employees were protected from falling in that employees performing roofing work on a commercial low-slope roof with warning lines not erected at least 6 feet away from the roof edge were exposed to fall hazards of approx. 16 feet above ground level.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.503 B01
- Issued
- May 26, 2023
- Abate by
- Jun 15, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(b)(1): The employer shall verify compliance with paragraph (a) of this section by preparing a written certification record. The written certification record shall contain the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer. If the employer relies on training conducted by another employer or completed prior to the effective date of this section, the certification record shall indicate the date the employer determined the prior training was adequate rather than the date of actual training. (a) On or about Feb. 28, 2023, the employer did not prepare a written certification record of fall protection training for employees observed performing roofing work on a commercial low-slope roof while not utilizing an effective fall protection system and exposed to fall hazards of approx. 16 feet above ground level.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at A2Z Roofing and Siding LLC
View A2Z Roofing and Siding LLC's full OSHA safety record →
More inspections in this industry (NAICS 238160)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346543226.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.