PALM SPRINGS, CA —
OSHA Inspection: DAVIS REED CONSTRUCTION INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DAVIS REED CONSTRUCTION INC in 3130 INDIAN CANYON DRIVE, PALM SPRINGS, CA 92262 (NAICS 236115). OSHA activity number 346553712.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DAVIS REED CONSTRUCTION INC
- Site address
- 3130 INDIAN CANYON DRIVE
- City
- PALM SPRINGS
- State
- CA
- ZIP
- 92262
- Mailing
- 11722 SORRENTO VALLEY ROAD SUITE F, SAN DIEGO, CA 92121
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236115
- Employees
- 14
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.300 A
- Issued
- May 19, 2023
- Penalty
- Initial $5,122 · Current $5,122
General-duty citation text
29 CFR 1926.300(a): Hand tool(s), power tool(s) or similar equipment were not maintained in a safe condition: Community Center Building at Monarch Apartment Construction Project: The flexible cord on the DeWalt chop saw was identified with a damaged outer jacket and was used by employees engaged in residential framing operations. Employees were exposed to electrical shock hazards.
Recent events (2)
- — I (O) $5122
- — Z (S) $5122
1926.404 F06
- Issued
- May 19, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: Community Center Building at Monarch Apartment Construction Project: The flexible cord on the DeWalt chop saw was identified with a missing grounding pin and was used by employees engaged in residential framing operations. Employees were exposed to electrical shock hazards.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1926.405 G02 IV
- Issued
- May 19, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: Community Center Building at Monarch Apartment Construction Project: A DeWalt chop saw, powered by a yellow flexible cord that had the outer jacket pulled back from the plug end, was used by employees engaged in residential framing operations. Employees were exposed to electrical shock hazards.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1926.451 F03
- Issued
- May 19, 2023
- Penalty
- Initial $8,036 · Current $5,625 Reduced
General-duty citation text
29 CFR 1926.451(f)(3): Scaffolds and scaffold components were not inspected for visible defects by a competent person before each work shift, and after any occurrence which could affect a scaffold's structural integrity: Building 12: On or about March 6, 2023, employees were engaged in residential construction framing operations and working from a supported scaffold without the scaffold inspected for defects prior to use. Employees were exposed to approximate 9.5-foot fall hazards.
Recent events (2)
- — I (O) $5625.2
- — Z (S) $8036
1926.454 A
- Issued
- May 19, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. Building 12: On or about March 6, 2023, employees were engaged in residential construction framing operations and working from a supported scaffold without being provided information and training on the hazards associated with the scaffold and methods to mitigate hazards associated with scaffolding. Employees were exposed to approximate 9.5-foot fall hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.501 B13
- Issued
- May 19, 2023
- Penalty
- Initial $8,036 · Current $5,625 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b): Building 12: On or about March 6, 2023, employees were performing residential framing and/or roofing operations along an open-sided edge without the use of a fall protection system. Employees were exposed to approximate 10-foot falls to the lower level.
Recent events (2)
- — I (S) $5625.1
- — Z (S) $8036
More inspections at Davis Reed Construction INC
View Davis Reed Construction INC's full OSHA safety record →
More inspections in this industry (NAICS 236115)
More inspections in CA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346553712.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.