PICATINNY ARSENAL, NJ —
OSHA Inspection: U.S. ARMY - PICATINNY ARSENAL
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of U.S. ARMY - PICATINNY ARSENAL in RANGE BUILDING #7, PICATINNY ARSENAL, NJ 07806 (NAICS 928110). OSHA activity number 346557895.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- U.S. ARMY - PICATINNY ARSENAL
- Site address
- RANGE BUILDING #7
- City
- PICATINNY ARSENAL
- State
- NJ
- ZIP
- 07806
- Mailing
- RISK MANAGEMENT OFFICE B355N DEVCOM ARMAMENTS CENTER, PICATINNY ARSENAL, NJ 07806
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 928110
- Employees
- 6000
- Ownership type
- D
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jun 28, 2023
- Abate by
- Jul 21, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about: February 27, 2023 and continuing Location: Range Building #7, PICATINNY ARSENAL, NJ 07806 a) The employer did not ensure that specific Lockout/Tagout procedures were developed, provided, and used for maintenance for employees performing servicing on equipment that included, but was not limited to an 90-meter range exhaust fan. Employee engaged on maintenance of exhaust fan suffered amputation to fingers due to machine not being locked out.
Recent events (1)
- — Z (S) $0
1910.147 C06 I
- Issued
- Jun 28, 2023
- Abate by
- Jul 21, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: On or about: February 27, 2023 and continuing Location: Range Building #7, PICATINNY ARSENAL, NJ 07806 a) The employer did not ensure that periodic inspections of the Hazardous Energy Control program were completed at least annually. Employees engaged in the service and repair of equipment that included, but not limited to, a 90-meter range exhaust fan were not observed and evaluated on use and effectiveness of LOTO procedures.
Recent events (1)
- — Z (S) $0
1910.147 C07 I A
- Issued
- Jun 28, 2023
- Abate by
- Jul 21, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolate: On or about: February 27, 2023 and continuing Location: Range Building #7, PICATINNY ARSENAL, NJ 07806 a) The employer did not ensure that authorized employees received hazardous energy control training. Employee who performed maintenance and servicing on equipment that included, but was not limited to, a 90-meter range exhaust fan were not provided Lockout/Tagout training that included methods and means needed to isolate electrical and mechanical energy.
Recent events (1)
- — Z (S) $0
1910.147 C07 I B
- Issued
- Jun 28, 2023
- Abate by
- Jul 21, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(B): Affected employees were not instructed in the purpose and use of the energy control procedure: On or about: February 27, 2023 and continuing Location: Range Building #7, PICATINNY ARSENAL, NJ 07806 a) The employer did not ensure that affected employees received hazardous energy control training. Employees performed servicing and maintenance on equipment that included, but was not limited to, a 90-meter range exhaust fan and were not provided Lockout/Tagout training that included methods and means needed to isolate electrical and mechanical energy.
Recent events (1)
- — Z (S) $0
More inspections at U.S. Army - Picatinny Arsenal
View U.S. Army - Picatinny Arsenal's full OSHA safety record →
More inspections in this industry (NAICS 928110)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346557895.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.