OSHA Inspection: SKO-DIE, INC.

Issued

2023-08-09 00:00:00

Abate by

2023-09-05 00:00:00

Penalty

Initial $8539.00 · Current $5977.00 Reduced

General-duty citation text

29 CFR  1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting:  a) Notching Room - On March 6, 2023,  the employer did not ensure that the the rotating shaft at the end of the flywheels of V&O Presses #38, and #49, was  guarded.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.

Issued

2023-08-09 00:00:00

Abate by

2023-09-05 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by this standard, live parts of electric equipment operating at 50 volts or more shall be guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the following means:  a) Notching Room - On March 6, 2023, the employer did not ensure that the electrical control box mounted on the Muller-Weingarten Robot Machine, had the cover completely on and effectively closed.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).