Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: PATRIOT TRINITY LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of PATRIOT TRINITY LLC in 205 PINE VALLEY DRIVE, TRINITY, TX 75862 (NAICS 332312). OSHA activity number 346569783.

Watch Patriot Trinity LLC — free Get an email when a new federal OSHA severe-injury report for Patriot Trinity LLC is published. One employer, no account, unsubscribe in one click.
Establishment
PATRIOT TRINITY LLC
Site address
205 PINE VALLEY DRIVE
City
TRINITY
State
TX
ZIP
75862
Mailing
205 PINE VALLEY, TRINITY, TX 75862
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332312
Employees
136
Ownership type
A

4 citations on file for this inspection.

1910.147 C04 I

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $8372.00 · Current $5023.00 Reduced
29 CFR  1910.147(c)(4)(i):Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  On or�about March 7, 2023,�an employee was exposed to amputation hazards while changing the blade on a Hercules band saw without energy control procedures being developed and utilized.
Recent events (2)
  • — I (S) $5023.2
  • — Z (S) $8372

1910.147 D03

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s):   On or�about March 7, 2023,�an employee was exposed to an amputation hazard while changing the blade on a Hercules band saw without operating its energy isolating device.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.147 D04 I

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees:   On or�about March 7, 2023,�an employee was exposed to an amputation hazard while changing the blade on a Hercules band saw without locking out the saw's energy isolating device.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1904.41 A02

Other-than-serious 1 instance 136 exposed
Issued
Abate by
Penalty
Initial $1674.00 · Current $1004.00 Reduced
29 CFR  1904.41(a)(2):29 CFR 1904.41(a)(2) Annual electronic submission of OSHA Form 300A Summary of Work-Related Injuries and Illnesses by establishments with 20 or more employees but fewer than 250 employees in designated industries. If your establishment had 20 or more employees but fewer than 250 employees at any time during the previous calendar year, and your establishment is classified in an industry listed in appendix A to subpart E of this part, then you must electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee. You must submit the information once a year, no later than the date listed in paragraph (c) of this section of the year after the calendar year covered by the form.  On or about March 15, 2023, the employer failed during calendar year 2023, to electronically submit information from their OSHA Form 300A or equivalent by March 2, 2023, the establishment employed 136 employees and is classified as 332312 - Fabricated Structural Metal Manufacturing.
Recent events (2)
  • — I (O) $1004.4
  • — Z (O) $1674

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346569783.