AUSTELL, GA —
OSHA Inspection: MARK TURNER GRADING, INC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of MARK TURNER GRADING, INC in 5839 MAXHAM RD, AUSTELL, GA 30168 (NAICS 237110). OSHA activity number 346572894.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MARK TURNER GRADING, INC
- Site address
- 5839 MAXHAM RD
- City
- AUSTELL
- State
- GA
- ZIP
- 30168
- Mailing
- 140 SEDGEVIEW DR, HAMPTON, GA 30228
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 237110
- Employees
- 6
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.651 H01
- Issued
- Aug 3, 2023
- Abate by
- Aug 31, 2023
- Penalty
- Initial $7,813 · Current $4,688 Reduced
General-duty citation text
29 CFR 1926.651(h)(1): Employees were working in excavations in which there was accumulated water, or excavations in which water was accumulating, and adequate precautions had not been taken to protect employees against the hazards posed by water accumulation a) Trench: On or about March 13, 2023, and at times prior, the employer exposed employees to cave-in/entrapment hazards, in that the employer did not provide a water removal system to control water accumulation while employees worked in a trench which measured 65 feet long by 14 feet wide by 17-18 feet deep for the purpose of installing new water line.
Recent events (2)
- — I (S) $4687.8
- — Z (S) $7813
1926.651 J02
- Issued
- Aug 3, 2023
- Abate by
- Aug 31, 2023
- Penalty
- Initial $7,813 · Current $4,688 Reduced
General-duty citation text
29 CFR 1926.651(j)(2):Protection was not provided by placing and keeping excavated or other materials or equipment at least 2 feet (.61m) from the edge of excavations, or by the use of retaining devices that were sufficient to prevent materials or equipment from falling or rolling into excavations, or by a combination of both if necessary a) On or about March 13, 2023, and times prior, the employer exposed employees to cave-in/entrapment hazards, in that the spoil pile was not kept at least 2 feet from the edge of the excavation while employees worked in a trench which measured 65 feet long by 14 feet wide by 17-18 feet deep for the purpose of installing new water line. b) On or about March 13, 2023, and times prior, the employer exposed employees to cave-in/entrapment hazards, in that excavation equipment was not kept at least 2 feet from the edge of the excavation while employees worked in a trench which measured 65 feet long by 14 feet wide by 17-18 feet deep for the purpose of installing new water line.
Recent events (2)
- — I (S) $4687.8
- — Z (S) $7813
1926.651 K01
- Issued
- Aug 3, 2023
- Abate by
- Aug 31, 2023
- Penalty
- Initial $7,813 · Current $4,688 Reduced
General-duty citation text
29 CFR 1926.651(k)(1): Daily inspections of excavations, the adjacent areas, and protective systems were not made by a competent person for evidence of a situation that could have resulted in possible cave-ins, indications of failure of protective systems, hazardous atmospheres, or other hazardous conditions a) On or about March 13, 2023, and times prior, the employer exposed employees to cave-in/entrapment hazards in that the employer failed to ensure that a competent person conducted daily inspections of the excavation prior to the beginning of the day and as needed to determine if hazards are present where employees worked in a trench which measured 65 feet long by 14 feet wide by 17-18 feet deep for the purpose of installing new water line.
Recent events (2)
- — I (S) $4687.8
- — Z (S) $7813
More inspections at Mark Turner Grading, INC
View Mark Turner Grading, INC's full OSHA safety record →
More inspections in this industry (NAICS 237110)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346572894.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.