Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: T AND M CUSTOM CARPENTRY

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of T AND M CUSTOM CARPENTRY in 913 QUAKING ASPEN RD, VERONA, WI 53593 (NAICS 238130). OSHA activity number 346580863.

Watch T AND M Custom Carpentry — free Get an email when a new federal OSHA severe-injury report for T AND M Custom Carpentry is published. One employer, no account, unsubscribe in one click.
Site address
913 QUAKING ASPEN RD
City
VERONA
State
WI
ZIP
53593
Mailing
W6495 KAMPEN ROAD, ARLINGTON, WI 53911
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

5 citations on file for this inspection.

1903.19 C01

Other-than-serious 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $376.00 · Current $376.00
29 CFR  1903.19(c)(1):  The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  The employer failed to submit certification of abatement within 10 calendar days of the abatement date for Citation 1 Item 1, Citation 1 Item 2a and Citation 1 Item 2b.
Recent events (1)
  • — Z (O) $376

1903.19 D01

Other-than-serious 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1903.19(d)(1):  The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required.  The employer failed to submit documentation of abatement within 10 days of the abatement date for Citation 1 Item 2a and Citation 1 Item 2b.
Recent events (1)
  • — Z (O) $0

1926.501 B13

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4688.00 · Current $4688.00
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):        On or about March 23, 2023, employees working from roof areas more than 12 feet above the ground were not protected from falls, thereby exposing the employees to fall hazards.
Recent events (1)
  • — Z (S) $4688

1926.1053 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2679.00 · Current $2679.00
29 CFR  1926.1053(b)(1):Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access:  On March 21, 2023, the portable ladder used to access the second story roof did not extend 3 feet above the upper landing surface being accessed.
Recent events (1)
  • — Z (S) $2679

1926.1053 B04

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1926.1053(b)(4):Ladder(s) were used for purposes other than the purpose for which they were designed:  On March 21, 2023, a portable stepladder used to access the second story roof was used for purpose(s) other than the purpose for which it was designed.
Recent events (1)
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346580863.