Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: PEDRO RIVERA

Unprogrammed Other inspection · Health discipline

On , OSHA opened an unprogrammed Other health inspection of PEDRO RIVERA in 1404 TIERRA BLANCA DRIVE, JUSTIN, TX 76247 (NAICS 238140). OSHA activity number 346583818.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Pedro Rivera — free Get an email when a new federal OSHA severe-injury report for Pedro Rivera is published. One employer, no account, unsubscribe in one click.
Establishment
PEDRO RIVERA
Site address
1404 TIERRA BLANCA DRIVE
City
JUSTIN
State
TX
ZIP
76247
Mailing
3240 GORDON AVENUE, FORT WORTH, TX 76110
Inspection type
Unprogrammed Other (I)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
5
Ownership type
A

6 citations on file for this inspection.

1910.1200 G01

Serious Gravity 1 1 instance 1 exposed
Issued
Mar 31, 2023
Abate by
Apr 14, 2023
Penalty
Initial $2,210 · Current $2,210

Hazardous substances 9000

29 CFR 1910.1200(g)(1): Employers did not have a safety data sheet in the workplace for each hazardous chemical which they use   On or about March 23, 2023, and at times prior thereto, at the residential construction site, front elevation of a one-story home, the employer did not ensure each employee had access to the safety data sheet for materials containing respirable crystalline silica to provide information and procedures on the use and hazards of cutting bricks with a hand-held cut-off saw. Employee was potentially exposed to respirable crystalline silica..
Recent events (1)
  • — Z (S) $2210

1926.102 A01

Serious Gravity 1 1 instance 1 exposed
Issued
Mar 31, 2023
Penalty
Initial $2,210 · Current $2,210
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying objects while using a nail gun.  On or about March 23, 2023, and at times prior thereto, at the residential construction site, front elevation of a one-story home, the employer did not ensure an employee cutting bricks with a hand-held cut-off saw without the retractable lower guard wore safety glasses. Employee was potentially exposed to struck-by and flying particles hazards.
Recent events (1)
  • — Z (S) $2210

1926.300 B04 II

Serious Gravity 1 1 instance 1 exposed
Issued
Mar 31, 2023
Abate by
Apr 14, 2023
Penalty
Initial $2,210 · Current $2,210
29 CFR 1926.300(b)(4)(ii): The point of operation of machine(s) whose operation exposed an employee to injury was not guarded:  On or about March 23, 2023, and at times prior thereto, at the residential construction site, front elevation of a one-story home, an employee was operating a hand-held cut-off saw without the retractable lower guard. Employee was potentially exposed to struck-by and caught-in hazards.
Recent events (1)
  • — Z (S) $2210

1926.1153 C01

Repeat Gravity 5 1 instance 1 exposed
Issued
Mar 31, 2023
Abate by
Apr 14, 2023
Penalty
Initial $8,840 · Current $8,840

Hazardous substances 9000

29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1,  On or about March 23, 2023, and at times prior thereto, at the residential construction site, front elevation of a one-story home, the employer did not ensure employees had engineering controls, work practices, and respiratory protection while an employee was cutting bricks with a hand-held cut-off saw. Employee was potentially exposed to respirable crystalline silica.  Pedro Rivera was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.1153(d)(2)(i) and 1926.1153(c)(1), which were contained in OSHA inspection number 1332364, citation number 001, item number 001, group a and b issued on July 20, 2018, and was affirmed as a final order on August 8, 2018, with respect to a workplace located at 8420 Comanche Spring Drive, Saginaw, TX 76131.
Recent events (1)
  • — Z (R) $8840

1926.1153 D02 I

Repeat Gravity 5 1 instance 1 exposed
Issued
Mar 31, 2023
Abate by
Apr 14, 2023
Penalty
Initial $0 · Current $0

Hazardous substances 9000

29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section:  On or about March 23, 2023, and at times prior thereto, at the residential construction site, front elevation of a one-story home, the employer did not assess the exposure of employees cutting bricks with a hand-held cut-off saw. Employee was potentially exposed to respirable crystalline silica.  Pedro Rivera was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.1153(d)(2)(i) and 1926.1153(c)(1), which were contained in OSHA inspection number 1332364, citation number 001, item number 001, group a and b issued on July 20, 2018, and was affirmed as a final order on August 8, 2018, with respect to a workplace located at 8420 Comanche Spring Drive, Saginaw, TX 76131.
Recent events (1)
  • — Z (R) $0

1926.1153 G01

Repeat Gravity 5 1 instance 1 exposed
Issued
Mar 31, 2023
Abate by
Apr 14, 2023
Penalty
Initial $0 · Current $0

Hazardous substances 9000

29 CFR 1926.1153(g)(1): The employer did not establish and implement a written exposure control plan:  On or about March 23, 2023, and at times prior thereto, at the residential construction site, front elevation of a one-story home, the employer had not implemented a written exposure control plan for employees cutting bricks with a hand-held cut-off saw. Employee was potentially exposed to respirable crystalline silica.  Pedro Rivera was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.1153(d)(2)(i) and 1926.1153(c)(1), which were contained in OSHA inspection number 1332364, citation number 001, item number 001, group a and b issued on July 20, 2018, and was affirmed as a final order on August 8, 2018, with respect to a workplace located at 8420 Comanche Spring Drive, Saginaw, TX 76131.
Recent events (1)
  • — Z (R) $0

View Pedro Rivera's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346583818.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.