SUMMIT, IL —
OSHA Inspection: GO T STEEL INC.
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of GO T STEEL INC. in 6000 S HARLEM AVE., SUMMIT, IL 60501 (NAICS 238190). OSHA activity number 346603038.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GO T STEEL INC.
- Site address
- 6000 S HARLEM AVE.
- City
- SUMMIT
- State
- IL
- ZIP
- 60501
- Mailing
- 6530 W IRVING PARK RD APT 501, CHICAGO, IL 60634
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238190
- Employees
- 4
- Ownership type
- A
Citations
5 citations on file for this inspection.
1903.19 C01
- Issued
- Aug 1, 2023
- Abate by
- Sep 5, 2023
- Penalty
- Initial $376 · Current $376
General-duty citation text
29 CFR 1903.19(c)(1): Within 10 calendar days after the abatement date, the employer must certify to OSHA (the Agency) that each cited violation has been abated, except as provided in paragraph (c)(2) of this section. a. On or about March 30, 2023, the employer did not certify to OSHA within 10 days after the abatement date that each of the following cited violations issued had been corrected: Citation Number Item Number Abatement Date 0100106/20/2023 01002a06/20/2023 01002b06/20/2023 0100306/20/2023
Recent events (1)
- — Z (O) $376
1926.451 B01
- Issued
- May 26, 2023
- Abate by
- Jun 2, 2023
- Penalty
- Initial $4,018 · Current $4,018
General-duty citation text
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as follows: a. On or about March 30, 2023, at the above addressed jobsite, an employee performing beam installation operations from a tubular welded frame scaffold, approximately fourteen (14) feet above ground, did not have the working level fully planked, thereby exposing the employee to fall hazards.
Recent events (1)
- — Z (S) $4018
1926.451 E01
- Issued
- May 26, 2023
- Abate by
- Jun 2, 2023
- Penalty
- Initial $4,018 · Current $4,018
General-duty citation text
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used. Crossbraces were used as a means of access. a) On or about March 30, 2023, at the above addressed jobsite, an employee was not equipped with a ladder to provide a safe means of access and egress, thereby, exposing the employee to falls of approximately fourteen (14) feet above ground.
Recent events (1)
- — Z (S) $4018
1926.454 A
- Issued
- May 26, 2023
- Abate by
- Jun 2, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. a. On or about March 30, 2023, at the above addressed jobsite, at the above addressed jobsite, an employee performing beam installation operations from a tubular welded frame scaffold was not trained to recognize the hazards associated with scaffolding, thereby exposing the employee to fall hazards.
Recent events (1)
- — Z (S) $0
1926.451 G04 I
- Issued
- May 26, 2023
- Abate by
- Jun 2, 2023
- Penalty
- Initial $4,018 · Current $4,018
General-duty citation text
29 CFR 1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms before being released for use by the employee other than erection/dismantling crews: a. On or about March 30, 2023, at the above addressed jobsite, an employee performing beam installation operations from a tubular welded frame scaffold, approximately fourteen (14) feet above ground, was not protected by guardrail systems along all open sides and ends of platforms, thereby exposing the employee to fall hazards.
Recent events (1)
- — Z (S) $4018
More inspections in this industry (NAICS 238190)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346603038.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.