MONTICELLO, AR —
OSHA Inspection: INTERFOR U.S. INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of INTERFOR U.S. INC. in 211 OLD TROY RD, MONTICELLO, AR 71655 (NAICS 321113). OSHA activity number 346623366.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Interfor U.S. INC. — free
Get an email when a new federal OSHA severe-injury report for Interfor U.S. INC. is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- INTERFOR U.S. INC.
- Site address
- 211 OLD TROY RD
- City
- MONTICELLO
- State
- AR
- ZIP
- 71655
- Mailing
- 700 WESTPARK DR. #100, PEACHTREE CITY, GA 30269
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 131
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.147 C04 II B
- Issued
- Oct 5, 2023
- Abate by
- Nov 30, 2023
- Penalty
- Initial $15,625 · Current $15,625
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy: On or about April 8, 2023, at the Screw Conveyor, employees performed maintenance activities such as but not limited to replacing screws on the Screw Conveyor were not protected from the release of hazardous energy. Energy control procedures including but not limited to the Sawmill Chip System did not address the hazards and specify the measures for controlling the hazards. (a) Written procedures did not specifically outline the steps for shutting down the equipment. (b) Written procedures did not specifically outline the steps for applying the energy isolating devices to all energy sources and did not identify the type and magnitude of the energy sources. (c) Written procedures did not specifically outline the steps for release of any stored energy, such as but not limited to hydraulic and mechanical energy.
Recent events (2)
- — I (O) $15625
- — Z (S) $15625
1910.147 C06 I
- Issued
- Oct 5, 2023
- Abate by
- Nov 30, 2023
- Penalty
- Initial $15,625 · Current $15,625
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: On or about April 10, 2023, employees perform service and maintenance on equipment and machinery including, but not limited to the "Sawmill Chip System". An internal audit was not performed to ensure de-energization procedures were being properly implemented.
Recent events (2)
- — I (O) $15625
- — Z (S) $15625
1910.147 E02 I
- Issued
- Oct 5, 2023
- Abate by
- Oct 18, 2023
- Penalty
- Initial $15,625 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(e)(2)(i): Before lockout or tagout devices were removed and energy was restored to the machine or equipment, authorized employees did not ensure that all employees had been safely positioned or removed from the work area: On or about April 8, 2023, employees performing servicing and maintenance on equipment such as, but not limited to the screw conveyor were not safely positioned when energy was restored.
Recent events (2)
- — I (S) $0
- — Z (S) $15625
1910.147 D01
- Issued
- Oct 5, 2023
- Abate by
- Oct 18, 2023
- Penalty
- Initial $15,625 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d)(1): The authorized employee did not have knowledge of the type and magnitude of the energy, the hazards of the energy to be controlled, and the method or means to control the energy before the authorized or affected employee turned off a machine or equipment: On or about April 8, 2023, at the Screw Conveyor, employees performing servicing or maintenance activities such as but not limited to replacing the screws on the auger were not familiar with the energy sources, the hazards associated with the energy sources, or the means to control the energy.
Recent events (2)
- — I (S) $0
- — Z (S) $15625
1910.147 C07 I A
- Issued
- Oct 5, 2023
- Abate by
- Oct 18, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control: On or about April 8, 2023, at the Screw Conveyor, employees performing servicing or maintenance activities such as but not limited to replacing the screws on the auger did not receive training on the specific energy control procedures including the types and magnitude of energy sources, the hazards associated with the energy sources, or the means to control the energy.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 D06
- Issued
- Oct 5, 2023
- Abate by
- Oct 18, 2023
- Penalty
- Initial $15,625 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d)(6): Prior to starting work on machines or equipment that had been locked out or tagged out, the authorized employee did not verify that isolation and de-energization of the machine or equipment had been accomplished: On or about April 8, 2023, at the Screw Conveyor, employees performed service and maintenance on equipment including but not limited to the auger of the Screw Conveyor without verifying the isolation and de-energization of the machine or equipment.
Recent events (2)
- — I (S) $0
- — Z (S) $15625
1910.147 F03 II D
- Issued
- Oct 5, 2023
- Abate by
- Oct 18, 2023
- Penalty
- Initial $15,625 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(f)(3)(ii)(D): Each authorized employee did not affix a personal lockout or tagout device to the group lockout device before working on the machine or equipment: On or about April 8, 2023, employees were performing servicing and maintenance tasks such as but not limited to replacing screws on the auger without each employee applying individual locks prior to beginning the servicing or maintenance.
Recent events (2)
- — I (S) $0
- — Z (S) $15625
1910.37 A03
- Issued
- Oct 5, 2023
- Abate by
- Oct 18, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed: On or about April 10, 2023, employees using the fire escape were not protected from accumulated sawdust on the landing in case of emergency.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Interfor U.S. INC.
Jun 23, 2025
MONTICELLO, AR
Feb 14, 2024
SWAINSBORO, GA
Oct 26, 2023
THOMASTON, GA
Jul 26, 2023
THOMASTON, GA
Jun 21, 2023
PRESTON, GA
View Interfor U.S. INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321113)
Jul 15, 2026
Crawford County Hardwoods, LLC · COCHRANTON, PA
Jul 15, 2026
Crawford County Hardwoods, LLC · COCHRANTON, PA
Jul 9, 2026
Binderholz Live OAK LLC · LIVE OAK, FL
Jul 8, 2026
Clark Lumber Company, LLC · LAFAYETTE, TN
Jul 7, 2026
317744699 - Stimson Lumber Company · GASTON, OR
More inspections in AR
Jul 15, 2026
CR Crawford Construction LLC · SILOAM SPRINGS, AR
Jul 14, 2026
Millar Partners, LLC · VAN BUREN, AR
Jul 14, 2026
Roger Wilkison Farms Partnership · BRINKLEY, AR
Jul 14, 2026
Master?S Plastering & More INC · SEARCY, AR
Jul 9, 2026
Nabholz Construction Corporation · LITTLE ROCK, AR
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346623366.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.