ROCHESTER, NY —
OSHA Inspection: P&R INDUSTRIES
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of P&R INDUSTRIES in 1524 NORTH CLINTON AVENUE, ROCHESTER, NY 14621 (NAICS 333249). OSHA activity number 346646599.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- P&R INDUSTRIES
- Site address
- 1524 NORTH CLINTON AVENUE
- City
- ROCHESTER
- State
- NY
- ZIP
- 14621
- Mailing
- 1524 NORTH CLINTON AVENUE, ROCHESTER, NY 14621
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333249
- Employees
- 30
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- May 31, 2023
- Abate by
- Jul 17, 2023
- Penalty
- Initial $6,250 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Porceduresw were not utilized for hte control of potentially hazardous energy when employees were engaged in activities covered by this section: a) On or about 04/20/2023, throughout the facility, Lockout/Tagout (LOTO) procedures were not utilized when replacing blades on vertical and horizontal band saws, exposing employhees to the unexpected startup of equipment. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $4000
- — Z (S) $6250
1910.147 C07 I
- Issued
- May 31, 2023
- Abate by
- Jul 17, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: a) On or about 04/20/2023, throughout the establishment; Employer did not provide Lockout/Tagout (LOTO) training to all authorized employees. Employees performed maintenance and servicing activities on machines such as, but not limited to: replacing blades on vertical and horizontal band saws. ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C06 I
- Issued
- May 31, 2023
- Abate by
- Jul 17, 2023
- Penalty
- Initial $6,250 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) On or about 04/20/2023, throughout the establishment; where employees perform servicing and maintenance on machines and equipment such as but not limited to; replacing blades on vertical and horizontal band saws. The employer did not review the energy control program and procedures and each employee's responsibilities under the energy control procedure being inspected, at least annually. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $4000
- — Z (S) $6250
1910.215 A04
- Issued
- May 31, 2023
- Abate by
- Jul 3, 2023
- Penalty
- Initial $4,687 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: a) On or about 04/20/2023, in the Machine shop area; employees were exposed to being struck by flying debris when using the use an Alliance Pedestal grinder to deburr parts with a work rest adjusted to more than 1/8 inch. b) On or about 04/20/2023, in the Machine shop area; employees were exposed to being struck by flying debris when using the Bench Grinder to deburr parts without a work rest. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $2500
- — Z (S) $4687
More inspections at P&R Industries
View P&R Industries's full OSHA safety record →
More inspections in this industry (NAICS 333249)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346646599.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.