WOODBURY, CT —
OSHA Inspection: COMPUWEIGH CORPORATION
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of COMPUWEIGH CORPORATION in 50 MIDDLE QUARTER ROAD, WOODBURY, CT 06798 (NAICS 334118). OSHA activity number 346650815.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COMPUWEIGH CORPORATION
- Site address
- 50 MIDDLE QUARTER ROAD
- City
- WOODBURY
- State
- CT
- ZIP
- 06798
- Mailing
- 50 MIDDLE QUARTER ROAD, WOODBURY, CT 06798
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 334118
- Employees
- 32
- Ownership type
- A
Citations
8 citations on file for this inspection.
1903.19 C01
- Issued
- Sep 11, 2023
- Abate by
- Oct 27, 2023
- Penalty
- Initial $877 · Current $877
General-duty citation text
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated: Company: On, or about, August 29, 2023, the employer had not provided abatement certification for violations issued on May 3, 2023.
Recent events (1)
- — Z (O) $877
1910.215 A04
- Issued
- May 3, 2023
- Abate by
- Jun 21, 2023
- Penalty
- Initial $4,687 · Current $3,281 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: Production Area: On, or about, March 24, 2023, the work rests provided on the Central Machinery bench mounted off-hand grinder were adjusted .75 inch from the wheel.
Recent events (2)
- — I (S) $3280.9
- — Z (S) $4687
1910.215 B09
- Issued
- May 3, 2023
- Abate by
- Jun 21, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: Production Area: On, or about, March 24, 2023, the tongue guards provided on the Central Machinery bench mounted off-hand grinder were adjusted more than one quarter of an inch from the wheel.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 E01
- Issued
- May 3, 2023
- Abate by
- Jun 21, 2023
- Penalty
- Initial $4,687 · Current $3,281 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: Production Area: On, or about, April 21, 2023, the company did not have a written Hazard Communication program. Employees used flammable aerosol products such as WD-40, Techspray E Line cleaner and Fluid Film.
Recent events (2)
- — I (S) $3280.9
- — Z (S) $4687
1910.1200 F06 II
- Issued
- May 3, 2023
- Abate by
- Jun 21, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(6)(ii): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical: Production Area: On, or about, April 21, 2023, four 275 gallon tanks that contained #2 Fuel Oil were not provided with a label to indicate the contents of the tanks and the appropriate hazard warning. #2 Fuel Oil is a Category 3 flammable liquid.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 G08
- Issued
- May 3, 2023
- Abate by
- Jun 21, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical in the workplace: Production Area: On, or about, April 21, 2023, the company did not have Safety Data Sheets for flammable liquids and aerosols such as, but not limited to, WD-40, Techspray E Line contact cleaner, Fluid Film and #2 Fuel Oil.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 H01
- Issued
- May 3, 2023
- Abate by
- Jun 21, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: Production Area: On, or about, April 21, 2023, the company had not provided information and training to employees regarding the Hazard Communication Standard and the safe use and handling of hazardous chemicals such as, but not limited to, WD-40, Techspray E Line contact cleaner, Fluid Film and #2 Fuel Oil.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1904.41 A02
- Issued
- May 3, 2023
- Abate by
- Jun 21, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1904.41(a)(2): Annual electronic submission of OSHA Form 300A Summary of Work-Related Injuries and Illnesses by establishments with 20 or more employees but fewer than 250 employees in designated industries. If your establishment had 20 or more employees but fewer than 250 employees at any time during the previous calendar year, and your establishment is classified in an industry listed in appendix A to subpart E of this part, then you must electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee. You must submit the information once a year, no later than the date listed in paragraph (c) of this section of the year after the calendar year covered by the form. Located at the CompuWeigh Corporation, 50 Middle Quarter Road, Woodbury, Connecticut: On, or about, April 21, 2023, the employer failed, to electronically submit information from their 2022 OSHA Form 300A or equivalent by March 2, 2023. a). The establishment employed 32 employees and is classified under NAICS 334118 during calendar year 2022.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 334118)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346650815.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.