ELMIRA HEIGHTS, NY —
OSHA Inspection: STAMPED FITTINGS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of STAMPED FITTINGS, INC. in 217 LENOX AVENUE, ELMIRA HEIGHTS, NY 14903 (NAICS 332322). OSHA activity number 346660202.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- STAMPED FITTINGS, INC.
- Site address
- 217 LENOX AVENUE
- City
- ELMIRA HEIGHTS
- State
- NY
- ZIP
- 14903
- Mailing
- 217 LENOX AVENUE, ELMIRA HEIGHTS, NY 14903
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 38
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.36 D01
- Issued
- Oct 20, 2023
- Abate by
- Nov 16, 2023
- Penalty
- Initial $6,250 · Current $3,750 Reduced
General-duty citation text
29 CFR 1910.36(d)(1): Employees were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge: a) Main entrance, Stamped Fittings, Inc., 217 Lenox Ave., Elmira Heights, NY 14903, on or about 4/26/2023, employees were prevented from using the main exit door without the use of a key. The door was locked and a key was inserted into the lock requiring it to be used to exit the building.
Recent events (2)
- — I (S) $3750
- — Z (S) $6250
1910.147 C04 II
- Issued
- Oct 20, 2023
- Abate by
- Nov 16, 2023
- Penalty
- Initial $7,813 · Current $4,688 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii): The lockout/tagout procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance. a) Production area, Stamped Fittings, Inc., 217 Lenox Ave., Elmira Heights, NY 14903, Omera Gasket Machine 1, on or about 4/26/2023. The written lockout/tagout procedures were not adequate for the Omera Gasket Machines, in that they did not clearly and specifically outline the specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy. Procedures did not include the control of all energy sources, including, but not limited to, pneumatic and hydraulic sources of energy. b) Production area, Stamped Fittings, Inc., 217 Lenox Ave., Elmira Heights, NY 14903, Omera Gasket Machine 2, on or about 4/26/2023. The written lockout/tagout procedures were not adequate for the Omera Gasket Machines, in that they did not clearly and specifically outline the specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy. Procedures did not include the control of all energy sources, including, but not limited to, pneumatic and hydraulic sources of energy. c)Production area, Stamped Fittings, Inc., 217 Lenox Ave., Elmira Heights, NY 14903, Omera Gasket Machine 3, on or about 4/26/2023. The written lockout/tagout procedures were not adequate for the Omera Gasket Machines, in that they did not clearly and specifically outline the specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy. Procedures did not include the control of all energy sources, including, but not limited to, pneumatic and hydraulic sources of energy.
Recent events (2)
- — I (S) $4687.8
- — Z (S) $7813
1910.303 B02
- Issued
- Oct 20, 2023
- Abate by
- Nov 16, 2023
- Penalty
- Initial $6,250 · Current $3,750 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling. a) Production Area (adjacent to welder #1), Stamped Fittings, Inc., 217 Lenox Ave., Elmira Heights, NY 14903, on or about 4/26/2023: Employees exposed to pendant cords with metal receptacle boxes attached that are used to provide power to equipment. The receptacle is listed for permanent mounting only. b) Production Area (adjacent to welder #4), Stamped Fittings, Inc., 217 Lenox Ave., Elmira Heights, NY 14903, on or about 4/26/2023: Employees exposed to pendant cords with metal receptacle boxes attached that are used to provide power to equipment. These receptacle is listed for permanent mounting only.
Recent events (2)
- — I (S) $3750
- — Z (S) $6250
More inspections at Stamped Fittings, INC.
View Stamped Fittings, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346660202.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.