Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: OUACHITA MACHINE WORKS

Unprogrammed Other inspection · Safety discipline

On , OSHA opened an unprogrammed Other safety inspection of OUACHITA MACHINE WORKS in 120 NORTH HILTON STREET, WEST MONROE, LA 71291 (NAICS 333993). OSHA activity number 346660400.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Ouachita Machine Works — free Get an email when a new federal OSHA severe-injury report for Ouachita Machine Works is published. One employer, no account, unsubscribe in one click.
Site address
120 NORTH HILTON STREET
City
WEST MONROE
State
LA
ZIP
71291
Mailing
120 NORTH HILTON STREET, WEST MONROE, LA 71291
Inspection type
Unprogrammed Other (I)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333993
Employees
28
Ownership type
A

7 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 1 instance 1 exposed
Issued
Oct 10, 2023
Penalty
Initial $6,641 · Current $6,641
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause serious physical harm to employees in that employees were exposed to crushed-by hazards:  a) On or about April 25, 2023, in the truck loading area outside the paint booth, employees operating a Hyster S50CT forklift to load metal stock onto a flatbed trailer were exposed to crushed-by hazards where seat belts were not used.
Recent events (1)
  • — Z (S) $6641

1910.110 F02 I

Serious Gravity 1 1 instance 28 exposed
Issued
Oct 10, 2023
Abate by
Oct 27, 2023
Penalty
Initial $4,687 · Current $4,687
29 CFR 1910.110(f)(2)(i): LP-gas containers were not stored in a manner to minimize exposure to excessive temperature rise, physical damage, or tampering by unauthorized persons.  a) On or about April 25, 2023, in the main shop area, employees were exposed to fire and explosion hazards when a liquid petroleum gas container was stored near the exit door/route unsecured.
Recent events (1)
  • — Z (S) $4687

1910.110 F02 II

Serious Gravity 1 1 instance 28 exposed
Issued
Oct 10, 2023
Abate by
Oct 27, 2023
Penalty
Initial $0 · Current $0
29 CFR 1910.110(f)(2)(ii): Liquefied petroleum gas container(s) stored inside were located near exits, stairways, or in areas normally used or intended for the safe exit of people:  a) On or about April 25, 2023, in the main shop area, employees were exposed to fire and explosion hazards when a liquid petroleum gas container was stored near the exit door/route.
Recent events (1)
  • — Z (S) $0

1910.134 E01

Serious Gravity 1 1 instance 1 exposed
Issued
Oct 10, 2023
Abate by
Oct 27, 2023
Penalty
Initial $4,687 · Current $4,687
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator before the employee was fit tested or required to use the respirator in the workplace. The employer may discontinue an employee's medical evaluations when the employee is no longer required to use a respirator.  a) On or about April 25, 2023, inside the paint booth, employees are required to utilize 3M half-face respirators with 5101 Cartridges while painting parts without first acquiring a medical evaluation.
Recent events (1)
  • — Z (S) $4687

1910.212 A01

Serious Gravity 10 1 instance 1 exposed
Issued
Oct 10, 2023
Penalty
Initial $10,938 · Current $10,938
29 CFR 1910.212(a)(1): One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips, and sparks:  a) On or about April 25, 2023, in the main shop area, A GMC GT-26160 Lathe was being operated to lathe round metal stock, without the chuck guard.
Recent events (1)
  • — Z (S) $10938

1910.215 A04

Serious Gravity 5 1 instance 1 exposed
Issued
Oct 10, 2023
Penalty
Initial $5,313 · Current $5,313
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one-eighth inch:  a) On or about April 25, 2023, in the main shop area, employees used a Baldor 812RE bench grinder to grind metal parts with a work rest and wheel opening greater than one eight of an inch.
Recent events (1)
  • — Z (S) $5313

1910.253 B02 IV

Serious Gravity 5 1 instance 1 exposed
Issued
Oct 10, 2023
Abate by
Oct 27, 2023
Penalty
Initial $6,250 · Current $6,250
29 CFR  1910.253(b)(2)(iv):Valve protection caps, where cylinders were designed to accept caps, were not always in place, hand-tight, except when cylinders were in use or connected for use:  a) On or about April 25, 2023, in the main shop area, employees used a propylene and oxygen cylinder used in burning and welding operations, that was missing the valve protection cap when not in use.
Recent events (1)
  • — Z (S) $6250

View Ouachita Machine Works's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346660400.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.