COOS BAY, OR —
OSHA Inspection: SAUSE BROS.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SAUSE BROS. in 40 ROSS INLET ROAD, COOS BAY, OR 97420 (NAICS 488310). OSHA activity number 346667033.
Where did this inspection happen?
- Establishment
- SAUSE BROS.
- Site address
- 40 ROSS INLET ROAD
- City
- COOS BAY
- State
- OR
- ZIP
- 97420
- Mailing
- 155 EAST MARKET AVENUE, COOS BAY, OR 97420
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 488310
- Employees
- 52
- Ownership type
- A
Citations
4 citations on file for this inspection.
1915.73 C
- Issued
- Abate by
- Penalty
- Initial $10938.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1915.73(c): When employees are working around open hatches not protected by coamings to a height of 24 inches or around other large openings, the edge of the opening shall be guarded in the working area to height of 36 to 42 inches, except where the use of such guards is made impracticable by the work actually in progress. a) SOMAR 40 Ross Inlet Road, Coos Bay, Oregon 97420, Siletz Barge project water side edge, on or about 26 April 2023 and at times prior thereto, Employees were exposed to potential fall hazard from open hatches not protected by guarding of the working area to height of 36 to 42 inches which could result in serious injury, permanent disability, or death.
Recent events (2)
- — I (S) $0
- — Z (S) $10938
1915.134 B
- Issued
- Abate by
- Penalty
- Initial $4687.00 · Current $3000.00 Reduced
General-duty citation text
29 CFR 1915.134(b): Floor and bench mounted grinders shall be provided with work rests which are rigidly supported and readily adjustable. Such work rests shall be kept a distance not to exceed 1/8 inch from the surface of the wheel. a) SOMAR 40 Ross Inlet Road, Coos Bay, Oregon 97420, Fabrication/Welding shop, on or about 26 April 2023 and at times prior thereto, Employees were exposed pinch point hazard which could result in serious injury from floor mounted grinder with abrasive wheel with a improperly adjusted work rest.
Recent events (2)
- — I (S) $3000
- — Z (S) $4687
1910.212 A01
- Issued
- Abate by
- Penalty
- Initial $4687.00 · Current $3000.00 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, and flying chips. a) SOMAR 40 Ross Inlet Road, Coos Bay, Oregon 97420, fabrication/welding shop, on or about 26 April 2023 and at times prior thereto, Employee were exposed to an ingoing nip point, rotating parts and flying chips from an unguarded drill press, which could result in a serious injury or disability.
Recent events (2)
- — I (S) $3000
- — Z (S) $4687
1910.178 L04 III
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.178(l)(4)(iii):An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a)SOMAR 40 Ross Inlet Road, Coos Bay, Oregon 97420, on or about 26 April 2023 and at times prior thereto, employees were exposed a potential hazards from not receiving evaluation for performance on a power industrial truck at least every three years. Which would increase the likelihood of being involved in an accident resulting in employees receiving injuries or physical harm.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at SAUSE BROS.
RAINIER, OR—2023-09-12 00:00:00
SAUSE BROS.
PORTLAND, OR—2023-01-13 00:00:00
SAUSE BROS.
PORTLAND, OR—2020-01-14 00:00:00
SAUSE BROS.
PORTLAND, OR—2020-01-14 00:00:00
SAUSE BROS.
RAINIER, OR—2019-12-27 00:00:00
SAUSE BROS.
View SAUSE BROS.'s full OSHA safety record →
More inspections in this industry (NAICS 488310)
PALMETTO, FL—2026-07-09
AGS TERMINALS AND SERVICES LLC
HOUSTON, TX—2026-07-07
JACINTOPORT INTERNATIONAL LLC
WATERFORD, NY—2026-07-07
NYS CANAL CORPORATION WATERFORD SECTION
GRANITE CITY, IL—2026-07-01
AMERICA'S CENTRAL PORT DISTRICT
TERMINAL ISLAND, CA—2026-06-30
APM TERMINALS PACIFIC, LTD.
More inspections in OR
KEIZER, OR—2026-07-15
317744780 - CEDARS GROUP LLC
PORTLAND, OR—2026-07-15
317744783 - HIGH CLASS ROOFING LLC
BEAVERTON, OR—2026-07-15
317744263 - INPRIA CORP
CANBY, OR—2026-07-14
317744696 - NEUSCHWANDER'S NURSERY LLC
TILLAMOOK, OR—2026-07-14
317744764 - TERIMORE LODGING LLC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346667033.