Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: TURFMAKER CORPORATION

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of TURFMAKER CORPORATION in 4931 GRISHAM DRIVE, ROWLETT, TX 75088 (NAICS 332999). OSHA activity number 346670433.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Turfmaker Corporation — free Get an email when a new federal OSHA severe-injury report for Turfmaker Corporation is published. One employer, no account, unsubscribe in one click.
Site address
4931 GRISHAM DRIVE
City
ROWLETT
State
TX
ZIP
75088
Mailing
4931 GRISHAM DRIVE, ROWLETT, TX 75088
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332999
Employees
20
Ownership type
A

4 citations on file for this inspection.

1910.95 C01

Serious Gravity 10 1 instance 20 exposed
Issued
Jun 29, 2023
Abate by
Aug 16, 2023
Penalty
Initial $5,313 · Current $3,188 Reduced

Hazardous substances 81108111

29 CFR  1910.95(c)(1):The employer did not administer a continuing, effective hearing conservation program as described in 29 CFR 1910.9(c) through (o) whenever employee noise exposures equal or exceed an 8-hour time-weighted average sound level of 85 decibels measured on the A scale, or equivalently a dose of fifty percent:  (a) On or about May1, 2023 and at times prior thereto, employees performing work at the worksite located at 4931 Grisham Drive, Rowlett, Texas  75088 were exposed to noise levels of 89.1-91.4 dBA  in the welding booths and noise levels of 95.5-102.4 dBA in the sandblasting room without benefit of a continuing, effective hearing conservation program.
Recent events (2)
  • — I (S) $3187.8
  • — Z (S) $5313

1910.132 D02

Serious Gravity 1 1 instance 20 exposed
Issued
Jun 29, 2023
Abate by
Aug 16, 2023
Penalty
Initial $2,277 · Current $1,366 Reduced

Hazardous substances 152091309135

29 CFR  1910.132(d)(2): The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed:  (a) On or about May 1, 2023 and at times prior thereto, within the worksite located at 4931 Grisham Dr., Rowlett, Texas, the employer had not performed a workplace hazard assessment with written certification for employees working in the sandblasting room and welding areas at the worksite.
Recent events (2)
  • — I (S) $1366.2
  • — Z (S) $2277

1910.134 C01

Serious Gravity 10 1 instance 3 exposed
Issued
Jun 29, 2023
Abate by
Aug 16, 2023
Penalty
Initial $5,313 · Current $0 Reduced

Hazardous substances 91309135

29 CFR  1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:   (a) On or about May 1, 2023 and at times prior thereto, in the sandblasting room within the worksite located at 4931 Grisham Drive, Rowlett, Texas 75088, during sandblasting operations, the sandblast operators were required to use a supplied-air hood respiratory protection system without benefit of a written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures for required respirator use.
Recent events (2)
  • — I (S) $0
  • — Z (S) $5313

1910.178 L01 I

Serious Gravity 5 1 instance 4 exposed
Issued
Jun 29, 2023
Abate by
Aug 16, 2023
Penalty
Initial $3,795 · Current $2,277 Reduced
29 CFR  1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  (a) On or about May 1, 2023 and at times prior thereto, the employer did not ensure that its forklift operators had been trained and certified for competency every three years as required by 29 CFR 1910.178(l)(4)(iii).
Recent events (2)
  • — I (S) $2277
  • — Z (S) $3795

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346670433.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.